Message-ID: <41CA0835.40707@hccnet.nl>
Organization: CFM$-FC (Coalition for Micro$oft-Free Computing)
User-Agent: Mozilla/5.0 (OS/2; U; Warp 4.5; nl-NL; rv:1.7) Gecko/20040617
MIME-Version: 1.0
References: <E1ChFuu-0002j8-00@pop-a065d10.pas.sa.earthlink.net>
In-Reply-To: <E1ChFuu-0002j8-00@pop-a065d10.pas.sa.earthlink.net>
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Date:  Thu, 23 Dec 2004 00:50:13 +0100
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  Kris Steenhaut <os2-wireless_users@2rosenthals.com>
To:  os2-wireless_users@2rosenthals.com
Subject: [OS2Wireless] Jacaranda for dummies.



Steven Levine schreef:

>  
>
>>>route -fh
>>>arp -f
>>>ifconfig lo 127.0.0.1
>>>dhcpstrt -i lan0 -d 20
>>>ipgate off
>>>      
>>>
>
>This all fine for your wired interface.
>
>  
>
Which are working fine indeed.

>Let's see protocol.ini to make sure it matches up.
>
>  
>

>>>IBM OS/2 LANMSGDD [08/01/02] 6.00 is loaded and operational.
>>>SYS0318: Message file AR0.MSG cannot be found for message  0042.
>>>IBM OS/2 LAN Netbind
>>>      
>>>
>
>I suspect AR0.MSG came with the artem driver
>
It does.

>.  You need to make sure it
>can be found in DPATH.
>
As there are no instructies to put it at a specific location I just had 
put it in \ ibmcom\macs.

anyway, now it says:

IBM OS/2 LANMSGDD [08/01/02] 6.00 is loaded and operational.
ARLTNDIS_NIF is loaded and operational.
IBM OS/2 LAN Netbin

>>Artem Onair Comcard 11 5V PCMCIA card.
>>driver version: ARWLAN$ v1.50
>>    
>>
>
>Just wondering.  Is this the same card as Mensys supplies?
>
>  
>
Bought it at Mensys 2 years ago.

>>Config.sys:  DEVICE=E:\IBMCOM\MACS\ARLTNDIS.OS2
>>    
>>
>
>You might try adding /V in case there's something useful to report.
>
>  
>
/V switch doesn't trigger additional information apparently.

>>Yep. Status OK and ready. btw: I had to disable com.sys to free an irq. 
>>    
>>
>
>Humm.  I'm surprised the driver would not share an IRQ.
>
Apparently it doesn't. But it could well be more a T41 issue than 
anything else.

>  IRQ3 should be
>fine for now.
>
>  
>


-- 
Groeten uit Gent,

   Kris

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=