Message-ID: <41C9F999.3040400@hccnet.nl>
Organization: CFM$-FC (Coalition for Micro$oft-Free Computing)
User-Agent: Mozilla/5.0 (OS/2; U; Warp 4.5; nl-NL; rv:1.7) Gecko/20040617
MIME-Version: 1.0
References: <E1ChEaI-0002TD-00@pop-a065c10.pas.sa.earthlink.net>
In-Reply-To: <E1ChEaI-0002TD-00@pop-a065c10.pas.sa.earthlink.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Date:  Wed, 22 Dec 2004 23:47:53 +0100
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  Kris Steenhaut <os2-wireless_users@2rosenthals.com>
To:  os2-wireless_users@2rosenthals.com
Subject: [OS2Wireless] Jacaranda for dummies.



Steven Levine schreef:

>With all the little side trips you take,
>
Do I? Well, let's keep it short.

> 
>I recommend you post:
>
>  setup.cmd
>  
>
> route -fh
> arp -f
> ifconfig lo 127.0.0.1
> REM ifconfig lan1 nil metric 1 mtu 1500
> REM ifconfig lan2 nil metric 1 mtu 1500
> REM ifconfig lan3 nil metric 1 mtu 1500
> REM ifconfig lan4 metric 1 mtu 1500
> REM ifconfig lan5 nil metric 1 mtu 1500
> REM ifconfig lan6 metric 1 mtu 1500
> REM ifconfig lan7 metric 1 mtu 1500
> dhcpstrt -i lan0 -d 20
> ipgate off


>  lantran.log
>
>  
>
> IBM OS/2 LANMSGDD [08/01/02] 6.00 is loaded and operational.
> SYS0318: Message file AR0.MSG cannot be found for message  0042.
> IBM OS/2 LAN Netbind



>and the date, size and version of the NIC driver you have installed and
>the command line you are using to load it.
>
>  
>
Artem Onair Comcard 11 5V PCMCIA card.
driver version: ARWLAN$ v1.50

Config.sys:  DEVICE=E:\IBMCOM\MACS\ARLTNDIS.OS2

>Based on what I read on os2warp.be, you should be using the artem driver. 
>Of course, this assumes you are using the same card, so perhaps you should
>post the model number.
>
>  
>
It's the latest not official but so called mandatory version of the driver.

>When you insert the card, does Socket Services recognize you have a NIC
>installed?
>
>  
>
Yep. Status OK and ready. btw: I had to disable com.sys to free an irq. 
The card is at IRQ 3 now. There is an option in mpts to set to no 
polling, but doesn't work coz if set so there is no OK-ready status.

-- 
Groeten uit Gent,

   Kris

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=