os2-wireless_users@2rosenthals.com Messaggio archiviato #3243 messaggio precedente messaggio successivo torna alla lista

Da: Kris Steenhaut <os2-wireless_users@2rosenthals.com> Intestazioni complete
Messaggio non codificato
Mittente: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Oggetto: [OS2Wireless] Jacaranda for dummies.
Data: Wed, 22 Dec 2004 23:47:53 +0100
A: os2-wireless_users@2rosenthals.com



Steven Levine schreef:

With all the little side trips you take,

Do I? Well, let's keep it short.


I recommend you post:

 setup.cmd
 

route -fh
arp -f
ifconfig lo 127.0.0.1
REM ifconfig lan1 nil metric 1 mtu 1500
REM ifconfig lan2 nil metric 1 mtu 1500
REM ifconfig lan3 nil metric 1 mtu 1500
REM ifconfig lan4 metric 1 mtu 1500
REM ifconfig lan5 nil metric 1 mtu 1500
REM ifconfig lan6 metric 1 mtu 1500
REM ifconfig lan7 metric 1 mtu 1500
dhcpstrt -i lan0 -d 20
ipgate off


 lantran.log

 

IBM OS/2 LANMSGDD [08/01/02] 6.00 is loaded and operational.
SYS0318: Message file AR0.MSG cannot be found for message  0042.
IBM OS/2 LAN Netbind



and the date, size and version of the NIC driver you have installed and
the command line you are using to load it.

 

Artem Onair Comcard 11 5V PCMCIA card.
driver version: ARWLAN$ v1.50

Config.sys:  DEVICE=E:\IBMCOM\MACS\ARLTNDIS.OS2

Based on what I read on os2warp.be, you should be using the artem driver. Of course, this assumes you are using the same card, so perhaps you should
post the model number.

 

It's the latest not official but so called mandatory version of the driver.

When you insert the card, does Socket Services recognize you have a NIC
installed?

 

Yep. Status OK and ready. btw: I had to disable com.sys to free an irq. The card is at IRQ 3 now. There is an option in mpts to set to no polling, but doesn't work coz if set so there is no OK-ready status.

--
Groeten uit Gent,

  Kris

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Isriviti: Feed, Riassunto, Indice.
Disiscriviti
Scrivi a ListMaster