| De: |
"Frank Vos" <os2-wireless_users@2rosenthals.com> |
Encabezados Completos
Mensaje no decodificado |
| Enviador: |
os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com> |
| Asunto: |
[OS2Wireless] Jacaranda for dummies. |
| Fecha: |
Tue, 21 Dec 2004 23:59:53 +0100 (CET) |
| Para: |
"os2-wireless_users@2rosenthals.com" <os2-wireless_users@2rosenthals.com> |
|
|---|
Hi Kris,
On Tue, 21 Dec 2004 23:14:26 +0100, Kris Steenhaut wrote:
>
>
>Frank Vos schreef:
>
>>To start using the WIFI network I used (before WLAN monitor :-) the following batch file:
>>_______________________________
>>/* turn on the radio
>> * This command activates the 802.11b interface
>> * original batch file by Neil Waldhauer
>>* The wireless NIC should be inserted in the PC Card slot
>> */
>>say "Activating the wireless network card"
>>' ifconfig lan0 down'
>>' ifconfig lan0 delete'
>>'dhcpmon -t'
>>'route -fh'
>>'arp -f'
>>'dhcpstrt -i lan1 -d 10'
>>say "Wireless networking enabled"
>>
>>
>Before we drag on, afaik I only can use lan0 (wlanstat.exe is running,
>but the exe alone can't change that fact apparently).
Why can you only use lan0? You have two network adapters in your laptop.
>Shouldn't we restrict just lo lan0?
According to the protocol.ini you've sent lan0 is your normal networkcard
and lan1 your WIFI-card. So before using the WIFI-card lan0 needs to be
deactivated, this is what the batch file does.
Kind regards,
Frank
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
|