Christian Langanke wrote:

Hi,

the only connection problem I experienced with my Artem Card connectiong to a NetGear MR314 was that I had to set
RTS Threshold to 2347 and Fragment Threshold to 2346, as these were the max values  once provided with the Artem driver. Until then I never changed these values.

Before I did that, I had quite some problems with the connection, first working, them dropping. At that time I did not test/use DHCP, so I cannot say anythign about the error being possible related to that as well.

_If_ that is your problem as well, it may well be that the windows driver by default uses different values for the card as the OS/2 driver does. If then the windows values do not match well your access point, you have a significantly worse connection under win compared to OS/2 or eCS.

Mine were both maxed at 2312.
I had updated the firmware and it's software but it had not updated the ndis driver (not sure why it should have).  I updated it and it seems to be working right now.Very odd as I was connecting to someone elses when it would roam to someone elses open network fine and I am at the limits to reach them it seems. Andy