Poštni seznam arhiviranih sporo?il Prejšnje sporo?ilo naslednje sporo?ilo Nazaj na seznam

Od: Christian Langanke <os2-wireless_users@2rosenthals.com> Glava
Izvorno E-sporo?ilo
Pošiljalec: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Zadeva: [OS2Wireless] OS2 wifi vs. winxp
Datum: Thu, 09 Dec 2004 22:04:42 +0100
Za: os2-wireless_users@2rosenthals.com

Andy Willis wrote:

Jeffrey Race wrote:

On Wed, 08 Dec 2004 21:06:14 -0700, Andy Willis wrote:

 

. it is on the low side but works fine but under XP it keeps dropping out on me entirely.
  


Could this be the infamous Wireless Zero Configuration problem?

 

Not sure.  It isn't the problem I thought it was originally.  It is something with my ap/router setup.  I found that someone else around here has setup wireless and I connected to their setup without issue and it shows weaker than mine did and I am now right next to my ap and it still isn't working quite right.  Initially I couldn't get an address through dhcp so I set a static one and that was working.  Then it quit letting me send and now it isn't working at all.  I upgraded the firmware to the latest 350 but didn't help it any.  I haven't used the xp partition in quite some time and it was working fine then so I am not sure what changed.  Wouldn't be an issue but I am waiting to get my jrescuer registration to see if I can undelete some files I mistakenly deleted and don't want to work with the eCS partition until I have a chance to see if I can restore those files.
Andy


Hi,

the only connection problem I experienced with my Artem Card connectiong to a NetGear MR314 was that I had to set
RTS Threshold to 2347 and Fragment Threshold to 2346, as these were the max values  once provided with the Artem driver. Until then I never changed these values.

Before I did that, I had quite some problems with the connection, first working, them dropping. At that time I did not test/use DHCP, so I cannot say anythign about the error being possible related to that as well.

_If_ that is your problem as well, it may well be that the windows driver by default uses different values for the card as the OS/2 driver does. If then the windows values do not match well your access point, you have a significantly worse connection under win compared to OS/2 or eCS.

bye, Christian

-------------------------------------------------

Christian Langanke
COS2E & CWSE
Team OS/2 Ruhr e.V.
cla@clanganke.de



=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Naro?iti: Poro?ilo (Feed), Izvle?ek (Digest), Indeks.
Odjava
E-pošta za mojstra za sezname