os2-wireless_users@2rosenthals.com ?????????????? ????? #3469

???:	Lewis G Rosenthal <os2-wireless_users@2rosenthals.com>	?? ???? ?????????
???:	os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
??:	[OS2Wireless] Flushing routes
??:	Mon, 06 Dec 2004 22:30:41 -0500
??:	OS/2 Wireless Users <os2-wireless_users@2rosenthals.com>

Has anyone noticed how it is sometimes necessary to flush the route table (and the arp table) multiple times, especially when switching back and forth between interfaces and/or networks? I just got done configuring a pair of LinkSys WRT54G's with Alchemy (the almost-opensource firmware available for them, which supports bridging mode, among other things - including boosting signal from the default 23mw to 84mw) - which I accomplished, BTW, entirely under OS/2 with Firefox (as if there would be any doubt!) - and in the process, had to switch back and forth between interfaces and also had to reset one of the WRT54G's about a half dozen times, as I managed to lock it up. Every reset, of course, meant a return to the default subnet of 192.168.1.0, which was not the subnet I needed to configure, so I had to reconfigure my NIC each time. Anyway, it appeared that after several reconfigs, I couldn't even ping my own interface, but the machine across the bridge could get a response from it (same subnet). Quite weird. I think at next year's Warpstock, we should add a session on advanced wireless topics, like WDS (wireless distribution system - bridging mode). Thoughts? -- Lewis ------------------------------------------------------------ Lewis G Rosenthal, CNA Rosenthal & Rosenthal, LLC Accountants / Network Consultants New York / Northern Virginia www.2rosenthals.com eComStation Consultants www.ecomstation.com Novell Users International www.novell.com/linux/truth ------------------------------------------------------------ =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= To unsubscribe from this list, send a message to steward@2rosenthals.com with the command "unsubscribe os2-wireless_users" in the body (omit the quotes). For help with other commands, send a message to steward@2rosenthals.com with the command "help" in the body (omit the quotes). This list is hosted by Rosenthal & Rosenthal P.O. Box 281, Deer Park, NY 11729-0281. Non- electronic communications related to content contained in these messages should be directed to the above address. (CAN-SPAM Act of 2003) =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

???????: ????, ??????, ??????.
?????????
??? ????????