In-Reply-To: <504-SnapperMsg4EDDFFFDBDD66285@68.246.145.12>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Message-ID: <0068242930.000008BI@pooh@deezee.org>
Date:  Fri, 03 Dec 2004 18:57:20 +0000 (GMT)
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  "Dave Saville" <os2-wireless_users@2rosenthals.com>
To:  "os2-wireless_users@2rosenthals.com" <os2-wireless_users@2rosenthals.com>
Subject: [OS2Wireless] Linksys WPC-11 V4

On Fri, 03 Dec 2004 13:35 -0500, Lewis G Rosenthal wrote:

>First, you need to look up the product ID. If it's listed at os2warp.be, 
>then you should be good to go. If not, you need to use something like 
>PCISCAN or SCANPCI (I forget...someone here will have the exact package 
>name; it's on Hobbes). next, from LAPS/MPTS edit the settings for the 
>adapter. Near the bottom of the options list, IIRC, you should see the 
>option for the product ID. Enter it, save your settings, & reboot. That 
>should get you working. If not, post back, & I'll dig into some more 
>details when I get back to the office this afternoon.
>

I assume you mean adaptor/protocol configuration, Stage three Edit in
MPTS? Nothing in the pop up resembles a product ID.

>Good luck, Dave!

I need some :-)

-- 
Regards

Dave Saville

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=