| From: |
"Dave Saville" <os2-wireless_users@2rosenthals.com> |
Full Headers
Undecoded message |
| Sender: |
os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com> |
| Subject: |
[OS2Wireless] Linksys WPC-11 V4 |
| Date: |
Fri, 03 Dec 2004 18:57:20 +0000 (GMT) |
| To: |
"os2-wireless_users@2rosenthals.com" <os2-wireless_users@2rosenthals.com> |
|
|---|
On Fri, 03 Dec 2004 13:35 -0500, Lewis G Rosenthal wrote:
>First, you need to look up the product ID. If it's listed at os2warp.be,
>then you should be good to go. If not, you need to use something like
>PCISCAN or SCANPCI (I forget...someone here will have the exact package
>name; it's on Hobbes). next, from LAPS/MPTS edit the settings for the
>adapter. Near the bottom of the options list, IIRC, you should see the
>option for the product ID. Enter it, save your settings, & reboot. That
>should get you working. If not, post back, & I'll dig into some more
>details when I get back to the office this afternoon.
>
I assume you mean adaptor/protocol configuration, Stage three Edit in
MPTS? Nothing in the pop up resembles a product ID.
>Good luck, Dave!
I need some :-)
--
Regards
Dave Saville
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
|