os2-wireless_users@2rosenthals.com Messaggio archiviato #3478

Da:	"Dave Saville" <os2-wireless_users@2rosenthals.com>	Intestazioni complete Messaggio non codificato
Mittente:	os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Oggetto:	[OS2Wireless] Linksys WPC-11 V4
Data:	Fri, 03 Dec 2004 18:57:20 +0000 (GMT)
A:	"os2-wireless_users@2rosenthals.com" <os2-wireless_users@2rosenthals.com>

On Fri, 03 Dec 2004 13:35 -0500, Lewis G Rosenthal wrote: >First, you need to look up the product ID. If it's listed at os2warp.be, >then you should be good to go. If not, you need to use something like >PCISCAN or SCANPCI (I forget...someone here will have the exact package >name; it's on Hobbes). next, from LAPS/MPTS edit the settings for the >adapter. Near the bottom of the options list, IIRC, you should see the >option for the product ID. Enter it, save your settings, & reboot. That >should get you working. If not, post back, & I'll dig into some more >details when I get back to the office this afternoon. > I assume you mean adaptor/protocol configuration, Stage three Edit in MPTS? Nothing in the pop up resembles a product ID. >Good luck, Dave! I need some :-) -- Regards Dave Saville =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= To unsubscribe from this list, send a message to steward@2rosenthals.com with the command "unsubscribe os2-wireless_users" in the body (omit the quotes). For help with other commands, send a message to steward@2rosenthals.com with the command "help" in the body (omit the quotes). This list is hosted by Rosenthal & Rosenthal P.O. Box 281, Deer Park, NY 11729-0281. Non- electronic communications related to content contained in these messages should be directed to the above address. (CAN-SPAM Act of 2003) =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Isriviti: Feed, Riassunto, Indice.
Disiscriviti
Scrivi a ListMaster