In-Reply-To: <200412031124390.SM00249@basement>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Message-ID: <0067548290.000008B8@pooh@deezee.org>
Date:  Fri, 03 Dec 2004 18:42:16 +0000 (GMT)
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  "Dave Saville" <os2-wireless_users@2rosenthals.com>
To:  "os2-wireless_users@2rosenthals.com" <os2-wireless_users@2rosenthals.com>
Subject: [OS2Wireless] Linksys WPC-11 V4

On Fri, 3 Dec 2004 11:24:36 -0700, Will Honea wrote:

>** Reply to message from "Dave Saville" <dave@deezee.org> on Fri, 03 Dec 2004
>17:43:39 +0000 (GMT)
>
>
>> On Fri, 03 Dec 2004 12:32 -0500, Lewis G Rosenthal wrote:
>> 
>> >You'll (probably) need to change the product ID. Best guess off the top of 
>> >my head. Is there anything on it at os2warp.be?
>> 
>> How?
>> 
>> The site says it works.
>
>You dure about the V4 working? I haven't looked lately, but the version 4 was
>NOT supported last time I checked and I swapped someone for another card.  Just
>earlier versions work AFAICT.  Smae deal with Linux - V4 not supported.

Just pasted from the table on the web site:

LinkSys Instant Wireless WPC-11
v4	0x0274	0x1614	PRISM3	Generic PRISM
RC4, Linksys WPC11 v3 Beta	

-- 
Regards

Dave Saville

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=