Message-ID: <4182AA9A.1050106@verizon.net>
Organization: Russell & Associates
User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.5) Gecko/20031211 Debian/1.5-2.0.0.lindows0.0.43.45+0
MIME-Version: 1.0
References: "Message-ID:" <5593-SnapperMsg4EDDFFFDBDA37809@68.246.42.161> <41811943.50305@verizon.net> <4181C914.2010308@2rosenthals.com> <41823C69.7080702@verizon.net> <4182986F.6010106@2rosenthals.com>
In-Reply-To: <4182986F.6010106@2rosenthals.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Date:  Fri, 29 Oct 2004 16:39:54 -0400
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  "Marcus H. Russell, P.E., L.S." <os2-wireless_users@2rosenthals.com>
To:  os2-wireless_users@2rosenthals.com
Subject: [OS2Wireless] [Fwd: [Fwd: Re: eCS 1.2/DSL]]



Lewis G Rosenthal wrote:

> On 10/29/2004 08:49 am, Marcus H. Russell, P.E., L.S. thus wrote :
>
>> Got the setup page!!!
>>
> Excellent, Mark! Okay, from the setup page, can you report back here 
> the firmware revision which should be listed toward the top, but under 
> the navigation bar?

1.45.7 Oct 8 2003

>
> Now, at the other end, do you have a machine connected to the other 
> LinkSys unit? If not, I'm going to need for you to move your eCS 
> workstation (or something else) so that we can connect to it while 
> keeping the DSL bridge connected (I'm very familiar with the Westell 
> B90 series; this should be no trouble) to the LinkSys and the phone 
> line. BTW, is your DSL service PPPoE (i.e., did they give you a 
> username and password for it), static (did they give you an IP address 
> to enter into your router or computer), or DHCP?

This is being written at PC operating with Lindows connected to the DSL 
line thru the Westell modem to the Linksys Broadband Wireless-G router, 
wired to the PC.  DSL service is, I think, PPPoE.  name is markrussell1 
and password is Sigma7.  I don't know if DHCP is active on the Lindows 
machine.  Lindows will not bring up Linksys setup screen ... it has its own.

>
> If you do have the ability to connect to the Wireless-G LinkSys box 
> near the DSL bridge, let me know the firmware on that one, as well. 
> This way, I can tell if we need to upgrade either device before 
> setting up the wireless bridge.

don't know how to get this.

>
> Good job!!
>

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=