In-Reply-To: <41811943.50305@verizon.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Message-ID: <auto-000353516522@admin.nni.com>
Date:  Thu, 28 Oct 2004 12:57:33 -0400 (EDT)
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  "Stanley Sidlov" <os2-wireless_users@2rosenthals.com>
To:  "os2-wireless_users@2rosenthals.com" <os2-wireless_users@2rosenthals.com>
Subject: [OS2Wireless] [Fwd: [Fwd: Re: eCS 1.2/DSL]]

On Thu, 28 Oct 2004 12:07:31 -0400, Marcus H. Russell, P.E., L.S. wrote:

>Sent this before.  DSL is Verizon supplied modem connected to Linksys 
>Broadband Wireless-G router WRTG v1.1  I don't know if I am any closer 
>to getting the eCS router, a Linksys Model BEFW1154 v4 Wireless-B 
>Broadband Router, 2.4 GHz 802.11b, talking to the DSL router. eCS router 
>is connected to box thru Belkin NIC (recognized at eCS 1.2 install)

1. always unplug the modem when switching the routers, so that they don't think they 
already issued an IP to a different mac address. 

2. on the client (ecs/OS/2), if you are using DHCP, make sure that you tell it to give 
up/release the lease and request a new one using the DHCP Monitor. Linksys (is that the 
right model #? there is a BEFW11S4 - that's S4 not 54) are 192.168.1.1 . 

The pings you told us about don't mean much. the 127 address is yourself, and loop back is 
configured. The router may or may not respond to pinging from the internal side. 

I would push the reset buttons for both units to make sure that they are at factory 
defaults. And without connecting them to the DSL modem, see if I could get them to give 
you an IP address  via DHCP. If they do, then connect to the turned off DSL modem and 
configure for PPOE with your acct password using a browser and 192.168.1.1 as the web 
page. When configuring the wireless portion, start with only the SSID, and work up into 
MAC filtering and WEP encryption, testing at each point.

You may find that updating the firmware in the unit not working will solve your 
problems....



 
Stan Sidlov
--
http://www.warpstock.org

 Warpstock 2004 will be in Denver, Colorado! October 21-24, what are you doing that weekend?

 


 







=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=