Mailing List os2-wireless_users@2rosenthals.com Archived Message #3583

From:	"David Butkovich" <os2-wireless_users@2rosenthals.com>	Full Headers Undecoded message
Sender:	os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Subject:	[OS2Wireless] [Fwd: [Fwd: Re: eCS 1.2/DSL]]
Date:	Thu, 28 Oct 2004 12:41:59 -0400
To:	"os2-wireless_users@2rosenthals.com" <os2-wireless_users@2rosenthals.com>

PMFJI, But it sounds like Mark is trying to use two APs to communicate between floors. Is this true? If not then disregard. If true, then configure each AP Mode in your setups to Wireless Bridge for Point to Point. The APs will bridge wirelessly but WILL NOT be available for any other wireless device. HTH, David On Thu, 28 Oct 2004 12:07:31 -0400, Marcus H. Russell, P.E., L.S. wrote: > > >Lewis G Rosenthal wrote: > >>Hi, Mark. It surely looks like DHCP is enabled. Please do the following & >>report your results: >> >>>From a command line, type PING 192.168.1.1 and tell us whether you get a >>reply (press Ctrl-C to stop the ping). Next, open Mozilla, and enter >>192.168.1.1 and see if you can log in (the Linksys default is no username & >>a password of "admin"). If this works (as I suspect it will), make note of >>the internet connection type as configured on the main page, & post the >>setting here. >> >> >PING 192.168.1.1 yields nothing. However, PING 127.0.0.1 yields 9 sent, >9 received, 0% loss, rnd-trip 0/0/0 PING 255.255.255.255 yields 7 >trans, 14 received, 0% loss; rnd-trip 0/1/10 entering >255.255.255.255.255 in browser yields "done." However, browser will not >connect to anything. > >>Also, please give us detailed info on your setup, including: >> >>Type of DSL connection you have, and the model of your DSL bridge. >> >> >Sent this before. DSL is Verizon supplied modem connected to Linksys >Broadband Wireless-G router WRTG v1.1 I don't know if I am any closer >to getting the eCS router, a Linksys Model BEFW1154 v4 Wireless-B >Broadband Router, 2.4 GHz 802.11b, talking to the DSL router. eCS router >is connected to box thru Belkin NIC (recognized at eCS 1.2 install) > >>___ >>Lewis >>___ >>Lewis G Rosenthal >>Rosenthal & Rosenthal >>Sent via SnapperMail >> >> >>...... Original Message ....... >>On Mon, 25 Oct 2004 10:46:12 -0400 "Marcus H. Russell, P.E., L.S." >><markrussell1@verizon.net> wrote: >> >> >>>-------- Original Message -------- >>>Subject: [Fwd: Re: eCS 1.2/DSL] >>>Date: Mon, 25 Oct 2004 09:29:10 -0400 >>>From: Marcus H. Russell, P.E., L.S. <markrussell1@verizon.net> >>>Reply-To: markrussell1@verizon.net >>>Organization: Russell & Associates >>>To: steward@mail.2rosenthals.com >>> >>> >>> >>>Please find my correspondence with Mensys that got me no help. Has any >>>body figured out how to get a eCS system to talk, via wireless routers, >>>to router connected to a DSL line? Mark >>> >>>-------- Original Message -------- >>>Subject: Re: eCS 1.2/DSL >>>Date: Sun, 24 Oct 2004 18:21:04 -0400 >>>From: Marcus H. Russell, P.E., L.S. <markrussell1@verizon.net> >>>Reply-To: markrussell1@verizon.net >>>Organization: Russell & Associates >>>To: Roderick Klein <rwklein@mensys.nl> >>>References: <200410242050.i9OKolB04687@relay2.san1.attens.com> >>> >>> >>> >>>I don't know how to turn on DHCP, but I found C:\MPTN\BIN\dhcpmon.exe >>>which, when run, yielded DDNS Host Name: Not Registered; IP Adress >>>192.168.1.100; DHCP client has valid lease. (as usual I have no idea >>>what any of that means) I also went to C:\TCPIP\bin and ran >>>tcpstart.cmd. I don't know what this accomplished. Starting Mozilla >>>browser fails. I need detailed, step by step, instructions on how to >>>get these routers talking to each other. >>>Thanks, Mark >>> >>>Roderick Klein wrote: >>> >>> >>> >>>>On Sun, 24 Oct 2004 11:38:25 -0400, Marcus H. Russell, P.E., L.S. >>>>wrote: >>>> >>>> >>>> >>>> >>>> >>>>>Here is what I did. Installed a Belkin NIC, which eCS 1.2 recognized >>>>>when I installed 1.2. BTW, 1.2 install was a breeze. I bought a >>>>>Linksys Wireless-B Broadband Router and connected it to the Belkin NIC. >>>>>DHCP is apparently loading at boot because there is a long delay before >>>>>boot finishes. Now what? How do I get eCS router to talk to the >>>>>Linksys Wireless-G router that is connected to the DSL line, which is >>>>>connected to the Lindows PC being used to write this? I feel that I am >>>>>almost there but don't know how to open the door. And yes I read so >>>>>much that I am more confused than ever!! Mark >>>>> >>>>> >>>>> >>>>> >>>>Some routers by default have turned of the build in dhcp server. Have >>>>you switched this on ? >>>> >>>>Roderick >>>> >>>> >>>> >>>> >>>> >>>> >>> >>>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= >>> >>>To unsubscribe from this list, send a message to >>>steward@2rosenthals.com with the command >>>"unsubscribe os2-wireless_users" in the body >>>(omit the quotes). >>> >>>For help with other commands, send a message >>>to steward@2rosenthals.com with the command >>>"help" in the body (omit the quotes). >>> >>>This list is hosted by Rosenthal & Rosenthal >>>P.O. Box 281, Deer Park, NY 11729-0281. Non- >>>electronic communications related to content >>>contained in these messages should be directed >>>to the above address. (CAN-SPAM Act of 2003) >>> >>>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= >>> >>> >>> >>> >> >>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= >> >>To unsubscribe from this list, send a message to >>steward@2rosenthals.com with the command >>"unsubscribe os2-wireless_users" in the body >>(omit the quotes). >> >>For help with other commands, send a message >>to steward@2rosenthals.com with the command >>"help" in the body (omit the quotes). >> >>This list is hosted by Rosenthal & Rosenthal >>P.O. Box 281, Deer Park, NY 11729-0281. Non- >>electronic communications related to content >>contained in these messages should be directed >>to the above address. (CAN-SPAM Act of 2003) >> >>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= >> >> >> >> >> > >=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= > >To unsubscribe from this list, send a message to >steward@2rosenthals.com with the command >"unsubscribe os2-wireless_users" in the body >(omit the quotes). > >For help with other commands, send a message >to steward@2rosenthals.com with the command >"help" in the body (omit the quotes). > >This list is hosted by Rosenthal & Rosenthal >P.O. Box 281, Deer Park, NY 11729-0281. Non- >electronic communications related to content >contained in these messages should be directed >to the above address. (CAN-SPAM Act of 2003) > >=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= > =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= To unsubscribe from this list, send a message to steward@2rosenthals.com with the command "unsubscribe os2-wireless_users" in the body (omit the quotes). For help with other commands, send a message to steward@2rosenthals.com with the command "help" in the body (omit the quotes). This list is hosted by Rosenthal & Rosenthal P.O. Box 281, Deer Park, NY 11729-0281. Non- electronic communications related to content contained in these messages should be directed to the above address. (CAN-SPAM Act of 2003) =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Subscribe: Feed, Digest, Index.
Unsubscribe
Mail to ListMaster