In-reply-to: <20041027013741.W84@warpix.org>
Message-id: <5783-SnapperMsg4EDDFFFDBDA4A2C8@68.246.129.162>
MIME-version: 1.0
Content-type: text/plain; charset=us-ascii
Content-transfer-encoding: 7BIT
References: <5760-SnapperMsg4EDDFFFDBDA4801D@68.246.129.162>
 <0I67005MVU0WVE@mta6.srv.hcvlny.cv.net> <20041027013741.W84@warpix.org>
Date:  Tue, 26 Oct 2004 20:55 -0400
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  Lewis G Rosenthal <os2-wireless_users@2rosenthals.com>
To:  os2-wireless_users@2rosenthals.com
Subject: [OS2Wireless] OS/2 based Router/AP

4MB before RAM is too big, John. :-(
___
Lewis
___
Lewis G Rosenthal
Rosenthal & Rosenthal
Sent via SnapperMail


...... Original Message .......
On Wed, 27 Oct 2004 01:37:41 +0100 John Poltorak <jp@warpix.org> wrote:
>I never saw the original reply - don't know why...
>
>On Tue, Oct 26, 2004 at 07:35:54PM -0400, madodel@ptdprolog.net wrote:
>>    Lewis G Rosenthal <lgrosenthal@2rosenthals.com> said:
>> 
>> >You'd need to squeeze the OS/2 install down quite a bit. From where I
>> >sit,  that's the biggest problem, John. Check out the size of one of the
>> >embedded  Linux distros...
>> 
>> >I know that OS/2 has been used in embedded apps before, but I doubt 
that 
>> >the installs have been that small.
>
>You are joking!
>
>I can boot OS/2 from a floppy disk. I can have a networking system in 4MB.
>
>OS/2 is *extremely* flexible and configurable. What it lacks is driver 
>support for odd bits of hardware like ADSL NICs, although it probably 
>doesn't have support for protocols that run over ADSL like PPoA or 
>whatever is used, but as far as embedding OS/2, I don't see any reason why 
>it wouldn't work. One day I hope to have it installed on a Disk On Chip.
>
>-- 
>John
>
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
>To unsubscribe from this list, send a message to
>steward@2rosenthals.com with the command
>"unsubscribe os2-wireless_users" in the body
>(omit the quotes).
>
>For help with other commands, send a message
>to steward@2rosenthals.com with the command
>"help" in the body (omit the quotes).
>
>This list is hosted by Rosenthal & Rosenthal
>P.O. Box 281, Deer Park, NY 11729-0281. Non-
>electronic communications related to content
>contained in these messages should be directed
>to the above address. (CAN-SPAM Act of 2003)
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
>

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=