Message-ID: <428BD0E5.8090508@rollanet.org>
User-Agent: Mozilla/5.0 (OS/2; U; Warp 4.5; en-US; rv:1.7.5) Gecko/20041220
MIME-Version: 1.0
References: <0076175200.00000BVB@pooh.deezee.org>
In-Reply-To: <0076175200.00000BVB@pooh.deezee.org>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Date:  Wed, 18 May 2005 18:33:57 -0500
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  Sam Lewis <os2-wireless_users@2rosenthals.com>
To:  os2-wireless_users@2rosenthals.com
Subject: [OS2Wireless] Login problems

I never could get two NIC's working in my laptops.  So I use one or the 
other and switch it in MPTS and reboot.  I have used TCP/IP, NetBios and 
NetBios over TCP/IP with no problems that way.
Sam


Dave Saville wrote:

>On Wed, 18 May 2005 11:59:39 -0700, Neil Waldhauer wrote:
>
>  
>
>>On Wed, 18 May 2005 18:34:51 +0100 (BST), "Dave Saville" <dave@deezee.org>
>>wrote:
>>
>>    
>>
>>>Have been using my ARtem card with no problems on my ECS 1.14 Tpad - but today
>>>I hit one.
>>>
>>>If I have connected via lan0 - cable - then I have no problems but if I am
>>>connected via lan1 - wifi - then I cannot login to get drives mounted. Does
>>>that not work over wifi?
>>>      
>>>
>>I haven't gotten it to work on my Ambicom (Prism chipset) or on my Cisco 350.
>>But others have gotten it to work. You have to get the right protocols bound to
>>the card, and I'm a little confused about binding NetBIOS to multiple adapters.
>>
>>I use NetDrive for wireless. I can mount drives all I want.
>>    
>>
>
>I have added netbios and netbios over tcp to the wifi adapter but it still
>won't login. If I login using the cable and then shut down the cable and fire
>up the wifi then it is OK and the mounted drives are still accessable. But
>starting from just wifi active and the requester hangs until it times out.
>
>  
>

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=