On Wed, 18 May 2005 11:59:39 -0700, Neil Waldhauer wrote:
>On Wed, 18 May 2005 18:34:51 +0100 (BST), "Dave Saville" <dave@deezee.org>
>wrote:
>
>> Have been using my ARtem card with no problems on my ECS 1.14 Tpad - but today
>> I hit one.
>>
>> If I have connected via lan0 - cable - then I have no problems but if I am
>> connected via lan1 - wifi - then I cannot login to get drives mounted. Does
>> that not work over wifi?
>
>I haven't gotten it to work on my Ambicom (Prism chipset) or on my Cisco 350.
>But others have gotten it to work. You have to get the right protocols bound to
>the card, and I'm a little confused about binding NetBIOS to multiple adapters.
>
>I use NetDrive for wireless. I can mount drives all I want.
I have added netbios and netbios over tcp to the wifi adapter but it still
won't login. If I login using the cable and then shut down the cable and fire
up the wifi then it is OK and the mounted drives are still accessable. But
starting from just wifi active and the requester hangs until it times out.
--
Regards
Dave Saville
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
back to list