Message-Id: <200505181859.j4IIxA0a014504@ns2.cruzio.com>
In-Reply-To: <0066894750.00000BTG@pooh.deezee.org>
References: <0066894750.00000BTG@pooh.deezee.org>
MIME-Version: 1.0
Date:  Wed, 18 May 2005 11:59:39 -0700
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  "Neil Waldhauer" <os2-wireless_users@2rosenthals.com>
To:  os2-wireless_users@2rosenthals.com
Subject: [OS2Wireless] Login problems

On Wed, 18 May 2005 18:34:51 +0100 (BST), "Dave Saville" <dave@deezee.org>
wrote:

> Have been using my ARtem card with no problems on my ECS 1.14 Tpad - but today
> I hit one.
> 
> If I have connected via lan0 - cable - then I have no problems but if I am
> connected via lan1 - wifi - then I cannot login to get drives mounted. Does
> that not work over wifi?

I haven't gotten it to work on my Ambicom (Prism chipset) or on my Cisco 350.
But others have gotten it to work. You have to get the right protocols bound to
the card, and I'm a little confused about binding NetBIOS to multiple adapters.

I use NetDrive for wireless. I can mount drives all I want.

Neil
-- 
Neil Waldhauer, neil@blondeguy.com

For every problem there exists an easy solution: elegant, concise, plausible, and completely wrong.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=