Mailing List os2-wireless_users@2rosenthals.com Archived Message #365

From: "Hakan" <os2-wireless_users@2rosenthals.com> Full Headers
Undecoded message
Subject: Re: [OS2Wireless] Asking again
Date: Tue, 24 Feb 2009 15:03:40 -0500 (EST)
To: "OS/2 Wireless Users Mailing List" <os2-wireless_users@2rosenthals.com>

Jeffrey,

Who is the manufacturer of your IPphone? And where do you have your
subscription?

Also, this tiny, tiny phone you are mentioning - which model are you
using?

Thanks.

On Wed, 25 Feb 2009 06:57:56 +1100, Ed Durrant wrote:

>Jeffrey Race wrote:
>> On Tue, 24 Feb 2009 10:22:34 +0000 (GMT), Dave Saville wrote:
>>  
>>> No ideas I am afraid, but how do you achieve this in, say a hotel room?
>>>    
>>
>> 1-Asus WL-330g logs on to Wi-Fi  (need computer for initial setup;
>>    thereafter it is smart enough to log on by itself unless it needs a
>>    rolling password as hotels often impose, changing at noon)
>> 2-Plug IPphone into Asus WL-330g; phone is pre-configured with
>>    London, Bangkok and Boston numbers.   Hit a button; get a
>>    dial tone.   Also, when someone calls from one of those countries,
>>    the IPphone rings.
>>
>> I am writing up a HowTo for some VoIP functions; anyone who
>> needs let me know.
>>
>> (Instead of IPphone you can use small ATA from Linksys or other
>> vendors and a plain analog phone.   I have a really tiny tiny one,
>> just bigger than a matchbox, usable with headset.  Always carry
>> it with me.)
>>
>> jeffrey race.
>>
>>
>>
>>  
>So the iPhone you refer to is the Linksys iPhone I presume ? I think
>Nokia do a phone with wifi connectivity as well as working as a normal
>phone - not sure if there is a software VOIP client for that though ?
>I guess a hacked (aka Jailbreaked) Apple iPhone may have this
>capability, so you wouldn't need the WL-330g then ?
>
>Even though softphones will never give the quality of a hardware device,
>it's a pity we still don't have a VOIP  softphone client for
>eComStation. If there were one, I could install it on my EeePC netbook
>and have the same capability that you refer to via my VSP.
>
>Cheers/2
>
>Ed.
>
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>This message is sent to you because you are subscribed to
>  the mailing list <os2-wireless_users@2rosenthals.com>.
>To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
>To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com>
>To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com>
>Send administrative queries to  <os2-wireless_users-request@2rosenthals.com>
>To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
>Web archives are publicly available at: http://lists.2rosenthals.com
>
>This list is hosted by Rosenthal & Rosenthal, LLC
>P.O. Box 281, Deer Park, NY 11729-0281. Non-
>electronic communications related to content
>contained in these messages should be directed
>to the above address. (CAN-SPAM Act of 2003)
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>



Subscribe: Feed, Digest, Index.
Unsubscribe
Mail to ListMaster