Message-ID: <4276774B.1070304@rollanet.org>
User-Agent: Mozilla/5.0 (OS/2; U; Warp 4.5; en-US; rv:1.7.5) Gecko/20041220
MIME-Version: 1.0
References: <200505021528.j42FSBL16324@ruby.fltg.net>
In-Reply-To: <200505021528.j42FSBL16324@ruby.fltg.net>
Content-Type: text/plain;
	charset=ISO-8859-1;
	format=flowed
Content-Transfer-Encoding: 7bit
Date:  Mon, 02 May 2005 13:54:03 -0500
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  Sam Lewis <os2-wireless_users@2rosenthals.com>
To:  os2-wireless_users@2rosenthals.com
Subject: [OS2Wireless] 1)Apology; 2)supported PCMCIA wifi cards

I concur on the Wireless Bridge method.  I currently use a Linksys Wet11 
and have been very happy with it.  But with these new small footprint 
bridges coming  out I'm going to get one for my laptop so I don't need 
to worry about configuring two NIC's in OS/2.  It would even be a help 
on the XP side since the integrated WiFi in my Latitude D600 doesn't 
alway get as strong of a signal as my IBM High Rate 128.  With a bridge 
you can move it around the Hotel room for better reception and not move 
the laptop around.
Just my $.02,
Sam

Julian Thomas wrote:

>In <0IFV0017B1YTQHH0@mxout5.netvision.net.il>, on 05/02/05 
>   at 06:44 PM, Stan Goodman <SPAM_FOILER@hashkedim.com> typed:
>
>  
>
>>This raises the question of whether there is any
>>802.11g-capable card that is supported, even if only in 802.11b mode --
>>the 802.11g mode would still be useful with Linux, which I am preparing
>>to install in the laptop machine. If not, I might resort to simply doing
>>all on-line work in Linux, with say, a Netgear 802.11g wifi card.
>>    
>>
>
>Check out the ASUS wl300g - antenna on one side and plugs into your rj45
>on the other.  ZERO installation hassle (although you seem to have a magic
>touch in that department <gg>).  Does 802.11G; configures from your
>browser [may need a firmware update to use something besides IE] and
>powers from the USB port.
>
>AFAIK there are still NO 802.11g devices supported for OS2/eCS.
> 
>  
>

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=