On Thu, 31 Mar 2005 21:58:48 -0500, Alan Beagley wrote:
>I have the same router with my cable Internet connection, but I have it
>configured as DHCP server in conjunction with fixed IP addresses on each
>machine -- 192.168.1.1xx. This works fine for me, and I don't see why
>the same wouldn't work with a DSL modem. But I have no VoIP "in circuit"
>to confuse matters.
>
>I've never used the CD that came with the router. I've done all the
>configuration -- and even firmware updates -- using Mozilla to access
>the router at 192.168.1.1.
And how is it configured? That's what I need to now so I can see if it
would work for me as well, DHCP server excepted.
>
>Don't know whether this helps.
>
>-=-
>Alan
>
>
>On 03/31/05 09:35 pm Hakan tossed the following ingredients into the
>ever-growing pot of cybersoup:
>
>> I have a small SOHO network with a Verizon Westell 2200 DSL modem
>> currenctly functioning as the router and as a DHCP server. The
>> computers, and the print server, all have static IP addresses on my
>> network and the Westell modem is configured as 192.168.1.1. In
>> addition I have a Lingo VoIP adapter which uses DHCP to get a local IP
>> address. At the moment /all/ devices are connected to an old 10-Mbps
>> hub. (For those interested, Lingo can be reached at www.lingo.com and
>> is interesting because it offers unlimited calling to 17 countries
>> besides the U.S. and Canada.)
>>
>> I just bought a Linksys router -- model WRT54G -- with the intent to
>> integrate it into the network and to have the Lingo VoIP adapter sit
>> between the Westell DSL modem and the Linksys router (the recommended
>> configuration); the computers and the printserver connected to the
>> Linksys, of course. The Lingo VoIP adapter should be between the DSL
>> modem and the Linksys router so that it can prioritize voice traffic
>> over other network traffic when necessary. The current hub will be
>> decommissioned.
>>
>> I hooked up the Linksys as 192.168.1.2 per above and disabled the DHCP
>> server in the Linksys since I want to continue to have the Westell be
>> the DHCP server. While I could reach the statically configured
>> computers on the network I was unable to get onto the net -- despite
>> having configured the Linksys as a router, not a gateway.
>>
>> What else do I need to change? I need to add that this is an all-OS/2
>> network, hence I cannot run the CD-ROM software supplied with the
>> Linksys.
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
>To unsubscribe from this list, send a message to
>steward@2rosenthals.com with the command
>"unsubscribe os2-wireless_users" in the body
>(omit the quotes).
>
>For help with other commands, send a message
>to steward@2rosenthals.com with the command
>"help" in the body (omit the quotes).
>
>This list is hosted by Rosenthal & Rosenthal
>P.O. Box 281, Deer Park, NY 11729-0281. Non-
>electronic communications related to content
>contained in these messages should be directed
>to the above address. (CAN-SPAM Act of 2003)
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
>
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
Tillbaks till lista