In-reply-to: <424A048D.5000106@rollanet.org>
Message-id: <7082-SnapperMsg4EDDFFFDBE6FC087@68.246.0.199>
MIME-version: 1.0
Content-type: text/plain; charset=us-ascii
Content-transfer-encoding: 7BIT
References: <auto-000391020686@admin.nni.com>
 <200503291519.j2TFJat5005965@ns2.cruzio.com> <424A048D.5000106@rollanet.org>
Date:  Tue, 29 Mar 2005 21:28 -0500
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  Lewis G Rosenthal <os2-wireless_users@2rosenthals.com>
To:  os2-wireless_users@2rosenthals.com
Subject: [OS2Wireless] need 'ireless' hub....

The LinkSys WRT54G can be put in bridge mode, too. This requires two of 
them, & appropriate firmware, but I've done this successfully, while 
maintaining 128-bit encryption and over a fairly long range (for a WRT54G). 
___
Lewis
___
Lewis G Rosenthal, CNA, CLE
Rosenthal & Rosenthal
Sent via SnapperMail


...... Original Message .......
On Tue, 29 Mar 2005 19:44:45 -0600 Sam Lewis <saml@rollanet.org> wrote:
>I use a linksys Wireless Bridge to network my workshop to the house.  I 
>use Netbios and TCP/IP on my OS/2 systems and Netbuie and TCP/IP on my 
>Windoze boxes just fine.  Just connect the Wireless bridge to your hub 
>and give it an IP address and your off to the races.
>Sam
>
>Neil Waldhauer wrote:
>
>>On Tue, 29 Mar 2005 09:50:02 -0500 (EST), "Stanley Sidlov"
>><stanleys@cybernex.net> wrote:
>>
>>  
>>
>>>Suggestions? (My current wireless is a "B" network.)
>>>    
>>>
>>
>>I've got a wireless "B" access point, and a bunch of computers in my 
office
>>attached by wire. My access point is behind the firewall, but I don't 
think
>>that matters here.
>>
>>In my garage, I have the computers that won't fit into the office. I've 
got a
>>game adapter and a hub, and all the computers there get their DHCP 
paramters
>>and connectivity from the access point. (The game adapter is also called a
>>wireless bridge).
>>
>>All this works for TCP/IP only. I'm a bit of a NETBIOS dummy, so I gave 
up with
>>that pretty early. But NetDrive/FTP plugin gives me file-sharing.
>>
>>Neil
>>  
>>
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
>To unsubscribe from this list, send a message to
>steward@2rosenthals.com with the command
>"unsubscribe os2-wireless_users" in the body
>(omit the quotes).
>
>For help with other commands, send a message
>to steward@2rosenthals.com with the command
>"help" in the body (omit the quotes).
>
>This list is hosted by Rosenthal & Rosenthal
>P.O. Box 281, Deer Park, NY 11729-0281. Non-
>electronic communications related to content
>contained in these messages should be directed
>to the above address. (CAN-SPAM Act of 2003)
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
>

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=