[OS2Wireless] 'no WLAN card' status image during file transfer
Date:
Fri, 25 Mar 2005 13:05:23 +0100
To:
os2-wireless_users@2rosenthals.com
Hi,
I recently switched from a PCMCIA linksys WPC11 to the IBM High Rate
Wireless LAN Mini-PCI (22P7701) in my ThinkPad T40. I also switched
from the GenPrism to the IBMprism drivers at that time.
Up until now, I mostly downloaded things, and experienced no problems.
However, I now noticed that when uploading larger files (via Peer to
another eCS1.2 machine, or via FTP to a Sun server), the WLAN status
image changes to no WLAN card installed and the upload stalls. No
error in lantran.log or popuplog.os2. The only way I found to get the
card working again, is by rebooting.
I tried some uploads from XP (the T40 is bual boot) and this went
flawless. So the card doesn't seem to be defective.
Why does the Wireless LAN Monitor (V1.12) think that the card is
removed? (It's a mini-PCI card, I can't remove it without opening the
case!)
Is this a driver issue or a XWLAN issue?
Best regards,
Jeroen Besse
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
back to list