os2-wireless_users@2rosenthals.com Messaggio archiviato #3761

Da:	"Leszek KUBRAK" <os2-wireless_users@2rosenthals.com>	Intestazioni complete Messaggio non codificato
Mittente:	os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Oggetto:	[OS2Wireless] File and Print Sharing becomes inop when two NIC adapters are installed
Data:	Fri, 18 Feb 2005 17:25:57 +0100 (CET)
A:	"os2-wireless_users@2rosenthals.com" <os2-wireless_users@2rosenthals.com>

On Thu, 17 Feb 2005 16:40:13 -0600, Stuart Updike wrote: >Hello all, > >I have a T21 with a built in Intel PRO 100 wired NIC installed and a >Cisco 350 PC card. > >If I install only one NIC adapter at a time, my file and print sharing >works just fine. In this scenario, when I wish to change from one card >to the other, I go into Adapters and Protocols and select the adapter I >wish to change to, click the Change button, save the settings, and >reboot. Each card works properly when its adapter is installed, and my >File and Print Sharing also works just fine. Please send me C:\IBMLAN\IBMLAN.INI and C:\IBMCOM\PROTOCOL.INI Network configuration program makes stupiditys in IBMLAN.INI when Netbios is binded to more inerfaces. I have very similar configuration (without Netbios over TCP/IP) and is working. Additionally my T23 is working as router between two peers (wired and wireless). Best regards Leszek Kubrak =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= To unsubscribe from this list, send a message to steward@2rosenthals.com with the command "unsubscribe os2-wireless_users" in the body (omit the quotes). For help with other commands, send a message to steward@2rosenthals.com with the command "help" in the body (omit the quotes). This list is hosted by Rosenthal & Rosenthal P.O. Box 281, Deer Park, NY 11729-0281. Non- electronic communications related to content contained in these messages should be directed to the above address. (CAN-SPAM Act of 2003) =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Isriviti: Feed, Riassunto, Indice.
Disiscriviti
Scrivi a ListMaster