| ???: |
"Leszek KUBRAK" <os2-wireless_users@2rosenthals.com> |
?? ????
????????? |
| ???: |
os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com> |
| ??: |
[OS2Wireless] File and Print Sharing becomes inop when two NIC adapters are installed |
| ??: |
Fri, 18 Feb 2005 17:25:57 +0100 (CET) |
| ??: |
"os2-wireless_users@2rosenthals.com" <os2-wireless_users@2rosenthals.com> |
|
|---|
On Thu, 17 Feb 2005 16:40:13 -0600, Stuart Updike wrote:
>Hello all,
>
>I have a T21 with a built in Intel PRO 100 wired NIC installed and a
>Cisco 350 PC card.
>
>If I install only one NIC adapter at a time, my file and print sharing
>works just fine. In this scenario, when I wish to change from one card
>to the other, I go into Adapters and Protocols and select the adapter I
>wish to change to, click the Change button, save the settings, and
>reboot. Each card works properly when its adapter is installed, and my
>File and Print Sharing also works just fine.
Please send me C:\IBMLAN\IBMLAN.INI and C:\IBMCOM\PROTOCOL.INI
Network configuration program makes stupiditys in IBMLAN.INI when Netbios
is binded to more inerfaces.
I have very similar configuration (without Netbios over TCP/IP) and is working.
Additionally my T23 is working as router between two peers (wired and wireless).
Best regards
Leszek Kubrak
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
|