Message-Id: <200502180226.j1I2QTwp099362@ns2.cruzio.com>
In-Reply-To: <42151D4D.7050108@mindspring.com>
References: <42151D4D.7050108@mindspring.com>
	are installed
MIME-Version: 1.0
Date:  Thu, 17 Feb 2005 18:27:43 -0800
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  "Neil Waldhauer" <os2-wireless_users@2rosenthals.com>
To:  os2-wireless_users@2rosenthals.com
Subject: [OS2Wireless] File and Print Sharing becomes inop when two NIC adapters

On Thu, 17 Feb 2005 16:40:13 -0600, Stuart Updike <stuupdike@mindspring.com>
wrote:

> Intel PRO/100 Network Connection
>           1 - IBM OS/2 NETBIOS
>           0 - IBM OS/2 NETBIOS OVER TCP/IP
>           0 - IBM TCP/IP
>     Cisco Aironet 340/350 11 Mbps Wireless Adapter
>           3 - IBM OS/2 NETBIOS
>           2 - IBM OS/2 NETBIOS OVER TCP/IP
>           2 - IBM TCP/IP

The way I use wireless, I leave off any kind of NETBIOS from the wireless NIC.
That way, everything works. I arrived at that when I realized that my Access
Point wasn't going to work with any kind of NETBIOS, so I was wasting my time
trying to get it to bind to my wireless NIC.

When I want to mount a drive using wireless, I use NetDrive. It isn't as good
as NetBIOS, but it works.

Neil
-- 
Neil Waldhauer, neil@blondeguy.com

The only substitute for good manners is fast reflexes.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=