In-Reply-To: <auto-000378830349@admin.nni.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Message-ID: <0068189380.000009JA@pooh@deezee.org>
Date:  Sat, 05 Feb 2005 18:56:03 +0000 (GMT)
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  "Dave Saville" <os2-wireless_users@2rosenthals.com>
To:  "os2-wireless_users@2rosenthals.com" <os2-wireless_users@2rosenthals.com>
Subject: [OS2Wireless] Using VPC with wifi

On Sat, 05 Feb 2005 13:38:01 -0500 (EST), Stanley Sidlov wrote:

>On Sat, 05 Feb 2005 18:09:51 +0000 (GMT), Dave Saville wrote:
>
>>I tried setting a second instance of the virtual switch, as per the VPC docs,
>>to see if I could get any VPC session to use the wireless card but it failed. I
>>seem to remember Christian or Adrian telling me at WSE that it would not work -
>>they were right :-)
>
>
>This is not correct. I have VPC on the T23 and I have both wired and wireless on it. When 
>configuring the networking for the VPC you have to use Virtual Switch, I believe, NAT 
>won't work. 
>
>Configuring two network nics requires manual editing. 

Could not get the second virtual switch to work. As I said I was told it would
not work. We are talking VPC and not Svista?

-- 
Regards

Dave Saville

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=