In-Reply-To: <0065652870.000009IQ@pooh@deezee.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Message-ID: <auto-000378830349@admin.nni.com>
Date:  Sat, 05 Feb 2005 13:38:01 -0500 (EST)
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  "Stanley Sidlov" <os2-wireless_users@2rosenthals.com>
To:  "os2-wireless_users@2rosenthals.com" <os2-wireless_users@2rosenthals.com>
Subject: [OS2Wireless] Using VPC with wifi

On Sat, 05 Feb 2005 18:09:51 +0000 (GMT), Dave Saville wrote:

>I tried setting a second instance of the virtual switch, as per the VPC docs,
>to see if I could get any VPC session to use the wireless card but it failed. I
>seem to remember Christian or Adrian telling me at WSE that it would not work -
>they were right :-)


This is not correct. I have VPC on the T23 and I have both wired and wireless on it. When 
configuring the networking for the VPC you have to use Virtual Switch, I believe, NAT 
won't work. 

Configuring two network nics requires manual editing. 


Stan Sidlov
--
http://www.warpstock.org

 Warpstock 2004 wasin Denver, Colorado! October 21-24, what WERE YOU doing that weekend?

 


 







=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=