From: "Jeffrey Race" <os2-wireless_users@2rosenthals.com>
To: "OS/2 Wireless List" <os2-wireless_users@2rosenthals.com>
Date: Thu, 26 Feb 2009 14:35:19 +0700
Priority: Normal
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Subject: WDS working
Message-ID: <auto-000002334885@2rosenthals.com>

So my WDS is working to some extent

 - ZyXEL 660-HW ADSL modem/router provides IP addresses

 - D-Link G-570s  at near end connected to above via Ethernet

-  Linksys WRT54GL with DD-WRT firmware at far end, configured
    as Repeater.

A PC connected via Ethernet port to WRT54GL receives IP address
from LAN supported via the ZyXEL router.

But I do not receive any wireless signal from the WRT54GL; can
connect to it only via Ethernet.    

Hints what to do to make it work to extend signal via wireless?
(One dipole still installed; the other RP-TNC connector is served
via 2 m coax to Cantenna from far end, beaming to 5 db gain
dipole enhanced by home-made parabola.  WRT54GL says 
received signal level is -66 db.)

Tks for all help

Jeffrey Race


-- 
This email was Anti Virus checked by Astaro Security Gateway. http://www.astaro.com