- ZyXEL 660-HW ADSL modem/router provides IP addresses
- D-Link G-570s at near end connected to above via Ethernet
- Linksys WRT54GL with DD-WRT firmware at far end, configured
as Repeater.
A PC connected via Ethernet port to WRT54GL receives IP address
from LAN supported via the ZyXEL router.
But I do not receive any wireless signal from the WRT54GL; can
connect to it only via Ethernet.
Hints what to do to make it work to extend signal via wireless?
(One dipole still installed; the other RP-TNC connector is served
via 2 m coax to Cantenna from far end, beaming to 5 db gain
dipole enhanced by home-made parabola. WRT54GL says
received signal level is -66 db.)
Tks for all help
Jeffrey Race
--
This email was Anti Virus checked by Astaro Security Gateway. http://www.astaro.com
torna alla lista