| From: |
Kris Steenhaut <os2-wireless_users@2rosenthals.com> |
Full Headers
Undecoded message |
| Sender: |
os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com> |
| Subject: |
[OS2Wireless] Linksys WPC-11 v4 |
| Date: |
Sun, 23 Jan 2005 02:32:27 +0100 |
| To: |
os2-wireless_users@2rosenthals.com |
|
|---|
jayant murthy schreef:
I actually received a Linksys WPC-11 v4 and not v3 but
that ssems to be ok.
I wouldn't be sure about that if I were you. If the v4 thinghy has a different chipset, it well could be totally OS/2 imcompatible.
I was hoping to plug and play but
of course no such luck.
First I installed the PCMCIA drivers using
cardbus.exe.
At least the power light on the card goes
on. Next I installed genprism2.0rc4 but XWLan shows
that no card is present.
In case you would have missed it, even with genprism wlanstat versions older than 1.2 . Meaning, you definitely need the latest 1.2 version.
I append my PCMCIA statements
and the protocol.ini. What should I check for/try?
Thanks,
Jayant
BASEDEV=PCMCIA.SYS BASEDEV=IBM2SS14.SYS
Looks OK. But make sure you have installed wlanstat 1.12 before proceeding any further.
--
Groeten uit Gent,
Kris
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
|