os2-wireless_users@2rosenthals.com Messaggio archiviato #3860 messaggio precedente messaggio successivo torna alla lista

Da: Kris Steenhaut <os2-wireless_users@2rosenthals.com> Intestazioni complete
Messaggio non codificato
Mittente: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Oggetto: [OS2Wireless] Linksys WPC-11 v4
Data: Sun, 23 Jan 2005 02:32:27 +0100
A: os2-wireless_users@2rosenthals.com



jayant murthy schreef:

I actually received a Linksys WPC-11 v4 and not v3 but
that ssems to be ok.

I wouldn't be sure about that if I were you. If the v4 thinghy has a different chipset, it well could be totally OS/2 imcompatible.

I was hoping to plug and play but
of course no such luck.

First I installed the PCMCIA drivers using
cardbus.exe.



At least the power light on the card goes
on. Next I installed genprism2.0rc4 but XWLan shows
that no card is present.

In case you would have missed it, even with genprism wlanstat versions older than 1.2 . Meaning, you definitely need the latest 1.2 version.

I append my PCMCIA statements
and the protocol.ini. What should I check for/try?

Thanks,
Jayant
BASEDEV=PCMCIA.SYS BASEDEV=IBM2SS14.SYS  

Looks OK. But make sure you have installed wlanstat 1.12 before proceeding any further.

--
Groeten uit Gent,

  Kris

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Isriviti: Feed, Riassunto, Indice.
Disiscriviti
Scrivi a ListMaster