Message-Id: <20050110225323-41913-8@molen>
In-Reply-To: <0054625940.0000077T@pooh@deezee.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Date:  Mon, 10 Jan 2005 22:53:22 +0100 (CET)
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  "Peter Verweij" <os2-wireless_users@2rosenthals.com>
To:  "os2-wireless_users@2rosenthals.com" <os2-wireless_users@2rosenthals.com>
Subject: [OS2Wireless] peer to peer but not AP - SOLVED

On Mon, 10 Jan 2005 15:09:56 +0000 (GMT), Dave Saville wrote:

>ARtem 1.5 - works if I configure through MPTS - fails through XWLan except for
>peer to peer.

Hi,

I know, it was/is the same problem with wifistat. So I think it's somewhere in the driver. Couldn't get Artem to work so changed to genprism driver.
The genprism rc4 doesn't have the problem,but has a problem with hibernation, I have to remove the card first (not only power off) because if I don't the 
card isn't recognized when I wake up from hibernation.

Peter


=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=