????????? #394 ?????? ?????? ???????? os2-wireless_users@2rosenthals.com

??: "Lewis G Rosenthal" <os2-wireless_users@2rosenthals.com> ?????? ?????????
?????????????? ?????????
????: Re: [OS2Wireless] Linksys Wireless Router Firmware Replacement
????: Thu, 26 Feb 2009 19:29:50 -0500
????: OS/2 Wireless Users Mailing List <os2-wireless_users@2rosenthals.com>

On 02/26/09 04:00 pm, Will Honea thus wrote :
** Reply to message from "Lewis G Rosenthal"
<os2-wireless_users@2rosenthals.com> on Thu, 26 Feb 2009 15:48:12 -0500


  
On 02/26/09 02:47 pm, Will Honea thus wrote :
    
** Reply to message from "Lewis G Rosenthal"
<os2-wireless_users@2rosenthals.com> on Thu, 26 Feb 2009 11:21:45 -0500


  
      
First, it is entirely possible that your BEFW11S4 is actually suffering a hardware failure, and it will likely stop handling wireless traffic entirely in the near future. This has been my experience with these (they don't brick entirely; typically, the wireless goes first). None of the available open (or closed) source third party firmware works with this model, so a new router is your best bet.
            
Pardon the intrusion but this caught my eye.  I've got one of these beasts that
my son fried trying to hook up his dish ISP.  The only part that isn't working
is the single port that connects to the internet - all the other ports and the
wireless works as advertised.  Do you know if dd-wrt will allow me to re-route
that bum port to one of the other ports?

  
      
Sorry to hear that, Will. Bonding is available, but I haven't tried it thusfar (correction: I have, but not in the manner you suggest). Have a look at http://www.dd-wrt.com/wiki/index.php/Bonding .
    
It's a plaything just gathering dust right now but I have a couple of uses for
it if I can get it working.  Of course, buying a cheap Linksys or Netgear
router/AP would probably be more cost effective (last one I bought was $21 at
Fry's) but it is something to keep idle fingers out of trouble...

  
      
:-)

If you've got the time and the inclination to play, *I'm* interested to hear how you make out!
    

I've had pretty good luck with my Actiontec DSL modem/router but that runs
BusyBox on Linux.  Heck, I can't even figure out how to open the blasted
Linksys box without breaking something so this sounds like a good way to avoid
dipping into the honey-do jar for a while. Don't hold your breath - seems like
I had more time for my own projects BEFORE I formally retired.

  
LOL!

In case you really *do* need to disassemble it, have a look here: http://www.dd-wrt.com/phpBB2/viewtopic.php?p=101908 .

Also, if you're so inclined, and as the WRT54G is now world-famous, there is a wealth of info available on Wikipedia: http://en.wikipedia.org/wiki/Linksys_WRT54G_series . interesting notes about cooling, too...

--
Lewis
-------------------------------------------------------------
Lewis G Rosenthal, CNA, CLP, CLE
Rosenthal & Rosenthal, LLC                www.2rosenthals.com
Need a managed Wi-Fi hotspot?                www.hautspot.com
Treasurer, Warpstock Corporation            www.warpstock.org
-------------------------------------------------------------


???????????: ?????????, ????????, ?????????.
??????????
???????? ?????????????? ?????? ????????