Message-Id: <200310181721.h9IHLG709848@infokub.com.pl>
In-Reply-To: <3F91554A.1060800@2rosenthals.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-2"
Content-Transfer-Encoding: 7bit
Date:  Sat, 18 Oct 2003 19:21:06 +0200 (CEST)
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  "Leszek KUBRAK" <os2-wireless_users@2rosenthals.com>
To:  "os2-wireless_users@2rosenthals.com" <os2-wireless_users@2rosenthals.com>
Subject: [OS2Wireless] ORiNOCO Silver card - need help part 2

On Sat, 18 Oct 2003 07:59:22 -0700, Lewis G Rosenthal wrote:

>Are there any other access points in range? If you turn your AP off, and 
>set your card without any SSID, does it pick up another? You might be 
>getting "stepped on." Try changing the channel at the AP and/or power 
>cycling it. Make sure encryption is turned off for this bit of 
>troubleshooting, too. Looks like the card is initialized and working 
>(make sure you can ping the loopback, just to check the stack). Also: 
>did you specify a MAC address in PROTOCOL.INI? You should do this.

I have a MAC in PROTOCOL.INI. 
Ping for localhost is working.
I was trying without and with encryption with parameters same as in W'2000.
No success:-((


================================
Leszek KUBRAK
info@infokub.com.pl

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=