Message-ID: <3F43770E.1050400@warmuth.at>
User-Agent: Mozilla/5.0 (OS/2; U; Warp 4.5; en-US; rv:1.4) Gecko/20030624
MIME-Version: 1.0
References: <200308200800.4529372.6@mail.2rosenthals.com>
In-Reply-To: <200308200800.4529372.6@mail.2rosenthals.com>
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Date: Wed, 20 Aug 2003 09:41:57 EST5EDT4,M4.1,M10.5
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  Michael Warmuth <os2-wireless_users@2rosenthals.com>
To:  os2-wireless_users@2rosenthals.com
Subject: [OS2Wireless] Re: OT: DaniS506/CF-PCMCIA adapter and TRAP in OS2LVM.DMD

[...]
> What does your Dani line look like in CONFIG.SYS, Michael?

BASEDEV=danis506.add /PCS /A:1 /BAY

I don't think that the problem lies here. It works as it should in the 
first place: When I insert the CF card in the PCMCIA adapter I get the 
beep of PC-Card Director first, followed by the single short beep of 
DaniS506 as described in the (very good) documentation. Running "Refresh 
Removeable Media" brings up as the E: drive object (C: and D: are HDD 
partitions). Using the "Eject disk" of the pop up menu removes the drive 
(or produces the described TRAP).

The chance of getting the failure (DaniS506 beeps in an interval of 
about 5 seconds, no access to the media) is more likely when the camera 
has written something to the CF card before, or when I do more than one 
access to the media at the same time. It does not matter if it is a read 
or a write access to produce the problem.

I tried everything one can think of, including manipulation of the CF 
card volume and partition using LVM and formatting. What I haven't tried 
is to use another file system than FAT, as the digital camera would not 
be able to read it.

Before I contact Daniela directly I would like to sort out if this is a 
problem with my setup, or a general problem (others have encountered it, 
too). I really don't want to slow down DaniS506 development by sending 
her unnecessary bug reports. ;-)

The funny thing is, that the PCM2ATA does not show up any problem. All 
the data on the CF card is accessible, I never lost a bit (I am aware 
of). I can (some sort of) live with the PCM2ATA driver, but it is clumsy 
compared to Daniela's elegant approach: The drive icons are there all 
the time, I have to access the CF card as E: or F: depending on the slot 
I inserted it into, and LVM does not assign a drive letter to a USB 
device automatically (it tries to use the already used letter E: i think).

Greetings,
Michael

-- 
Michael Warmuth     Austria - The place in the heart of Europe
Waldegghofg. 27          where no kangaroos are hopping around
A-1170 Wien
Austria                                     michael@warmuth.at
+43-676-3863440                                 www.warmuth.at



=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=