Mailing List os2-wireless_users@2rosenthals.com Archived Message #4503

From:	"Stanley Sidlov" <os2-wireless_users@2rosenthals.com>	Full Headers Undecoded message
Sender:	os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Subject:	OS/2 Wireless Users List: Still Don't Get It.
Date:	Thu, 31 Jul 2003 00:46:30 EST5EDT4,M4.1,M10.5
To:	"os2-wireless_users@2rosenthals.com" <os2-wireless_users@2rosenthals.com>

I have to say, I don't have this problem in WinXP. This is a TP23, newly minted by IBM. I am using the Latest Dani Drivers with the PCCard Support, and I had/have the PCCard Director installed (4.22). When I was using the IBM drivers, the WiFi could turn off the Card's radio, now, it says it did but the card's led keeps blinking. Are there any IBM drivers for the PCCard Director that should not be used with the DANI drivers? I am using the suggested settings in the DANI documentation. I have a SMC2655W Access Point. The only time that I can connect to the card is when I set WiFi Stat to ADHOC which is NOT the way it is setup. I am using a card specific driver which I'm not supposed to discuss, but I see that the IBM Prism NIF file is nearly identical except for the manufacturer's id's and using "MIB" for the default SSID. I don't know if on the AP the key is shared or open which is configurable in the NIF, it appears to work either way, that is I connect to 'something' -- XP doesn't show any other networks but mine when it is connected, at least none that have a visible SSID. I know what the network SSID is, and in the Wifi profile it is configured correctly, but when the card does connect it never ever shows the SSID, but it shows: Connected to IBSS SSID: non-spec @ 2 or sometimes 11 Mbs Now, this is sort of strange since it won't connect when BSS is the choice, yet, it finds a BSS when ADHOC. I have yet to see the Green Bar showing signal strength, and the AP is about a foot away with the attennae horizontal. This gives a 100% signal strength in WinXP. Also, DHCP is unable to obtain a lease after shutting down Lan0. [Again, Lan0 would be the first NIC in the MPTS? and LAN1 would be the second. Right?**] I assume that the card would not say "Connected" if it was unable to communicate with the AP, but again, I expected that it would say the SSID of the network in the WiFi profile when it did. The WiFi I have came in a zip WiFi0992.zip The WiFI executable is 69709. The one in the IBMPrism package is 53869 -- both work the same way and have the same problem described above. I really don't understand some of the inconsistencies in the .NIF file. As an example here is one that is obvious: [DESIRED_SSID] Display = "Network Name (SSID)" Type = String StrLength = 32 Default = "Merry Christmas !" Optional = YES Editable = YES Help= "You need to provide the Service Set ID of your Wireless LAN. If you want to log on any available WLAN, set this parameter to ANY." The default SSID is 'Merry Christmas !' and if you change it to 'ANY' it should locate any SSID, but if it does, what is the SSID it will display? The name of the one that it found or 'non-spec' ?? Here's one that I don't find consistent: [IRQ] Display = "IRQ Number" Type = Decimal Set = 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 Optional = YES Editable = YES Help= "You can specify an IRQ number to be used with this module." SO HOW do you specify the IRQ? Is it on the driver for the PCMCIA card? the NIF? Does this require a DEFAULT = statement aka DEFAULT = 10? I would like to change the IRQ it interferes with a Modem card. And this one brings up questions, like what MAC does it show without a default? Or if you use MAC Address as part of your security, do you have to put the MAC address in? (I turned this off in the AP so that I could try to get this card configured without additional problems.) [NETADDRESS] Display = "MAC Address" Type = HexString StrLength = 12 ;Default = Range = 000000000000-FFFFFFFFFFFF Optional = YES Editable = YES Help = "You can set the MAC Address for the WLAN module with this parameter. This can be useful if your Access Point employs Access Control Lists through MAC Addresses." Questions, questions. I need some guidance, and answers. ** MPTS question, you can't have two networks setup for DHCP, but the command line net start commands will overide this. What does everyone else use for the information in the Wireless or '2nd' NIC? 1.1.1.1 as the manual address? Blanks? Anyone? Stan Sidlov http://www.warpstock.org Warpstock 2003 in San Francisco! Weekend of October 18th! =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= To unsubscribe from this list, send a message to steward@2rosenthals.com with the command "unsubscribe os2-wireless_users" in the body (omit the quotes). For help with other commands, send a message to steward@2rosenthals.com with the command "help" in the body (omit the quotes). =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Subscribe: Feed, Digest, Index.
Unsubscribe
Mail to ListMaster