| Od: |
<os2-wireless_users@2rosenthals.com> |
Glava
Izvorno E-sporo?ilo |
| Pošiljalec: |
os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com> |
| Zadeva: |
OS/2 Wireless Users List: Success with built-in & wireless NICs! |
| Datum: |
Mon, 19 May 2003 21:02:08 EST5EDT4,M4.1,M10.5 |
| Za: |
os2-wireless_users@2rosenthals.com |
|
|---|
Thanks Randy,
I will test your system out on my T20.
Would you email your scripts to me or upload to hobbes?
Keith Cotroneo
cotroneo@stny.rr.com
In <E19HnIy-0007LK-00@albatross.mail.pas.earthlink.net>, on 05/19/03
at 12:19 PM, Randy Fowler <rfowler@attglobal.net> said:
>Keith & Neil,
>OK. I've been using the built-in NIC by itself in my ThinkPad T22 running
>MCP2 for some time, so it was already set up as the Intel Pro PCI
>adapter as adapter# 0, with protocols OS/2 Netbios and TCP/IP.
>In preparation for the Cisco 350, I had to first add the OS/2 Card
>Services as described in the Cisco 340 driver's readme.txt. Then using
>MPTS, I added the Cisco 340 as adapter# 1, with protocol TCP/IP.
>Previously assigned under TCP/IP config notebook: Lan0, the built-in NIC,
>has a static IP address of 192.168.0.11 The IP address of my LinkSys
>Router at home is 192.168.0.1, so I had also defined a default route to
>it. Accordingly, here's my setup.cmd file, which didn't change BTW
>after installing the 340:
>(this file is located in \mptn\bin; written by tcpip configuration
>notebook; REM lines have been removed for readability)
>
>---
>route -fh
>arp -f
>ifconfig lo 127.0.0.1
>ifconfig lan0 192.168.0.11 netmask 255.255.255.0 metric 1 mtu 1500 route
>add default 192.168.0.1 -hopcount 1
>ipgate off
>---
>So when I boot, the built-in NIC gets configured with a hard IP address
>and a default route to my home Router 192.168.0.1. Whenever I go to the
>office, I run the following cmd file to switch over to its Router at
>192.168.0.99:
>
>--- SetRoute-Work.cmd ---
>route delete default 192.168.0.1
>route add default 192.168.0.99 1
>ping 192.168.0.99 56 1
>pause
>Then when I return home, I run this cmd file to put things back:
>--- SetRoute-Home.cmd ---
>route delete default 192.168.0.99
>route add default 192.168.0.1 1
>ping 192.168.0.1 56 1
>pause
>I hardly ever boot my ThinkPads... I always Suspend them and they will
>automatically do the ThinkPad Hibernation if I don't Resume within 90
>mins.
>OK, now for switching over to use the wireless NIC. First, here's what
>my routing looks at home with my cat5 cable plugged in to the built-in
>NIC:
>---
>[C:\]netstat -r
> destination router netmask metric flags
>intrf
>default 192.168.0.1 0.0.0.0 1 UGSP
>lan0 127.0.0.1 127.0.0.1 255.255.255.255 0
>UH lo 192.168 192.168.0.11 255.255.255.0
>0 UC lan0 ---
>Now, I unplug the cat5 and insert the Cisco 350. Card Services plays a
>beep and the lights come on. Now, I have to delete the default route
>because it's pointing to lan0 (which is now unplugged):
>route flush
>Now I have to delete lan0 entirely (just downing lan0 doesn't allow the
>new default route to point to lan1).
>ifconfig lan0 delete
>I have my LinkSys router setup for a DHCP server, with IP address set for
>.100 and above. I want the 350 to use DHCP, so I issue this command:
>dhcpstrt -i lan1
>After a few seconds, that command completes. My routing now looks like
>this:
>---
>[C:\]netstat -r
> destination router netmask metric flags
>intrf
>default 192.168.0.1 0.0.0.0 0 UGP
>lan1 127.0.0.1 127.0.0.1 255.255.255.255 0
>UH lo 192.168 192.168.0.101 255.255.255.0
>0 UC lan1 ---
>That's it... I'm now surfing using the LinkSys Access Point attached to
>my LinkSys Router.
>Putting things back is pretty much the same. Now I have to create some
>command files to automate these steps.
>HTH,
>Randy Fowler
>Columbia, SC
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>To unsubscribe from this list, send a message to
>steward@2rosenthals.com with the command
>"unsubscribe os2-wireless_users" in the body
>(omit the quotes).
>For help with other commands, send a message
>to steward@2rosenthals.com with the command
>"help" in the body (omit the quotes).
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
-----------------------------------------------------------
cotroneo@stny.rr.com
Dragen FTP for os/2 http://cotroneo.dyndns.org
-----------------------------------------------------------
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
|