Message-ID: <417E7831.5080509@verizon.net>
Organization: Russell & Associates
User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.5) Gecko/20031211 Debian/1.5-2.0.0.lindows0.0.43.45+0
MIME-Version: 1.0
References: Message-ID: <5593-SnapperMsg4EDDFFFDBDA37809@68.246.42.161>
In-Reply-To: <5593-SnapperMsg4EDDFFFDBDA37809@68.246.42.161>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Date:  Tue, 26 Oct 2004 12:15:45 -0400
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  "Marcus H. Russell, P.E., L.S." <os2-wireless_users@2rosenthals.com>
To:  os2-wireless_users@2rosenthals.com
Subject: [OS2Wireless] [Fwd: [Fwd: Re: eCS 1.2/DSL]]

1.  PING 192.168.1.1:  56 data bytes; 9 packets transmitted, 0 packets 
received, 100% packet loss.
2.  Mozilla: timed out

DSL line connects to WESTELL modem (Model B90-210015-04, Rev C) supplied 
by Verizon.  Modem is connected to Linksys Wireless-G Router (WRT54G 
v1.1)  eCS PC is distant about 50' and one floor down.  eCS syatem has 
Belkin NIC connected to a Linksys Wireless-B broadband router.  NIC was 
detected upon installatioin of eCS 1.2.

Brief bio:  Old, 77, Civil Engineer (went to college with K&E loglog 
decitrig slide rule)  Reside in Voorhees, Camden Co., NJ.  Been using 
OS/2 since 1.2.  Would liked to have gone to Warpstock but don't travel 
much anymore.

Lewis G Rosenthal wrote:

>Hi, Mark.  It surely looks like DHCP is enabled. Please do the following & 
>report your results:
>
>>From a command line, type PING 192.168.1.1 and tell us whether you get a 
>reply (press Ctrl-C to stop the ping). Next, open Mozilla, and enter 
>192.168.1.1 and see if you can log in (the Linksys default is no username & 
>a password of "admin"). If this works (as I suspect it will), make note of 
>the internet connection type as configured on the main page, & post the 
>setting here. 
>
>Also, please give us detailed info on your setup, including:
>
>Type  of  DSL connection you have, and the model of your DSL bridge.
>
>BTW, if you had made it to Warpstock this weekend, I covered much of this 
>in my Wi-Fi classes & there was also a home networking session. Also, you 
>could have told Roderick in person what you thought of his answer! :-D
>
>Warpstock 2004 in Denver was GREAT!!!!!!!!!
>___
>Lewis
>___
>Lewis G Rosenthal
>Rosenthal & Rosenthal
>Sent via SnapperMail
>
>
>...... Original Message .......
>On Mon, 25 Oct 2004 10:46:12 -0400 "Marcus H. Russell, P.E., L.S." 
><markrussell1@verizon.net> wrote:
>  
>
>>-------- Original Message --------
>>Subject: 	[Fwd: Re: eCS 1.2/DSL]
>>Date: 	Mon, 25 Oct 2004 09:29:10 -0400
>>From: 	Marcus H. Russell, P.E., L.S. <markrussell1@verizon.net>
>>Reply-To: 	markrussell1@verizon.net
>>Organization: 	Russell & Associates
>>To: 	steward@mail.2rosenthals.com
>>
>>
>>
>>Please find my correspondence with Mensys that got me no help.  Has any 
>>body figured out how to get a eCS system to talk, via wireless routers, 
>>to router connected to a DSL line?  Mark
>>
>>-------- Original Message --------
>>Subject: 	Re: eCS 1.2/DSL
>>Date: 	Sun, 24 Oct 2004 18:21:04 -0400
>>From: 	Marcus H. Russell, P.E., L.S. <markrussell1@verizon.net>
>>Reply-To: 	markrussell1@verizon.net
>>Organization: 	Russell & Associates
>>To: 	Roderick Klein <rwklein@mensys.nl>
>>References: 	<200410242050.i9OKolB04687@relay2.san1.attens.com>
>>
>>
>>
>>I don't know how to turn on DHCP, but I found C:\MPTN\BIN\dhcpmon.exe 
>>which, when run, yielded  DDNS Host Name: Not Registered; IP Adress 
>>192.168.1.100; DHCP client has valid lease.  (as usual I have no idea 
>>what any of that means)  I also went to C:\TCPIP\bin and ran 
>>tcpstart.cmd.  I don't know what this accomplished.  Starting Mozilla 
>>browser fails.  I need detailed, step by step, instructions on how to 
>>get these routers talking to each other.
>>Thanks, Mark
>>
>>Roderick Klein wrote:
>>
>>    
>>
>>>On Sun, 24 Oct 2004 11:38:25 -0400, Marcus H. Russell, P.E., L.S.
>>>wrote:
>>>
>>> 
>>>
>>>      
>>>
>>>>Here is what I did.  Installed a Belkin NIC, which eCS 1.2 recognized 
>>>>when I installed 1.2.  BTW, 1.2 install was a breeze.  I bought a 
>>>>Linksys Wireless-B Broadband Router and connected it to the Belkin NIC.  
>>>>DHCP is apparently loading at boot because there is a long delay before 
>>>>boot finishes.  Now what?  How do I get eCS router to talk to the 
>>>>Linksys Wireless-G router that is connected to the DSL line, which is 
>>>>connected to the Lindows PC being used to write this?  I feel that I am 
>>>>almost there but don't know how to open the door.  And yes I read so 
>>>>much that I am more confused than ever!!  Mark
>>>>   
>>>>
>>>>        
>>>>
>>>Some routers by default have turned of the build in dhcp server. Have
>>>you switched this on ?
>>>
>>>Roderick
>>>
>>>
>>> 
>>>
>>>      
>>>
>>
>>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>>
>>To unsubscribe from this list, send a message to
>>steward@2rosenthals.com with the command
>>"unsubscribe os2-wireless_users" in the body
>>(omit the quotes).
>>
>>For help with other commands, send a message
>>to steward@2rosenthals.com with the command
>>"help" in the body (omit the quotes).
>>
>>This list is hosted by Rosenthal & Rosenthal
>>P.O. Box 281, Deer Park, NY 11729-0281. Non-
>>electronic communications related to content
>>contained in these messages should be directed
>>to the above address. (CAN-SPAM Act of 2003)
>>
>>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>>
>>
>>    
>>
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
>To unsubscribe from this list, send a message to
>steward@2rosenthals.com with the command
>"unsubscribe os2-wireless_users" in the body
>(omit the quotes).
>
>For help with other commands, send a message
>to steward@2rosenthals.com with the command
>"help" in the body (omit the quotes).
>
>This list is hosted by Rosenthal & Rosenthal
>P.O. Box 281, Deer Park, NY 11729-0281. Non-
>electronic communications related to content
>contained in these messages should be directed
>to the above address. (CAN-SPAM Act of 2003)
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
>
>
>  
>

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=