Hi, Mark.  It surely looks like DHCP is enabled. Please do the following & report your results:

From a command line, type PING 192.168.1.1 and tell us whether you get a

reply (press Ctrl-C to stop the ping). Next, open Mozilla, and enter 192.168.1.1 and see if you can log in (the Linksys default is no username & a password of "admin"). If this works (as I suspect it will), make note of the internet connection type as configured on the main page, & post the setting here. Also, please give us detailed info on your setup, including:

Type  of  DSL connection you have, and the model of your DSL bridge.

BTW, if you had made it to Warpstock this weekend, I covered much of this in my Wi-Fi classes & there was also a home networking session. Also, you could have told Roderick in person what you thought of his answer! :-D

Warpstock 2004 in Denver was GREAT!!!!!!!!!
___
Lewis
___
Lewis G Rosenthal
Rosenthal & Rosenthal
Sent via SnapperMail


...... Original Message .......
On Mon, 25 Oct 2004 10:46:12 -0400 "Marcus H. Russell, P.E., L.S." <markrussell1@verizon.net> wrote:
 

-------- Original Message --------
Subject: [Fwd: Re: eCS 1.2/DSL]
Date: Mon, 25 Oct 2004 09:29:10 -0400
From: Marcus H. Russell, P.E., L.S. <markrussell1@verizon.net>
Reply-To: markrussell1@verizon.net
Organization: Russell & Associates
To: steward@mail.2rosenthals.com



Please find my correspondence with Mensys that got me no help.  Has any body figured out how to get a eCS system to talk, via wireless routers, to router connected to a DSL line?  Mark

-------- Original Message --------
Subject: Re: eCS 1.2/DSL
Date: Sun, 24 Oct 2004 18:21:04 -0400
From: Marcus H. Russell, P.E., L.S. <markrussell1@verizon.net>
Reply-To: markrussell1@verizon.net
Organization: Russell & Associates
To: Roderick Klein <rwklein@mensys.nl>
References: <200410242050.i9OKolB04687@relay2.san1.attens.com>



I don't know how to turn on DHCP, but I found C:\MPTN\BIN\dhcpmon.exe which, when run, yielded  DDNS Host Name: Not Registered; IP Adress 192.168.1.100; DHCP client has valid lease.  (as usual I have no idea what any of that means)  I also went to C:\TCPIP\bin and ran tcpstart.cmd.  I don't know what this accomplished.  Starting Mozilla browser fails.  I need detailed, step by step, instructions on how to get these routers talking to each other.
Thanks, Mark

Roderick Klein wrote:

   

On Sun, 24 Oct 2004 11:38:25 -0400, Marcus H. Russell, P.E., L.S.
wrote:



     

Here is what I did.  Installed a Belkin NIC, which eCS 1.2 recognized when I installed 1.2.  BTW, 1.2 install was a breeze.  I bought a Linksys Wireless-B Broadband Router and connected it to the Belkin NIC.  DHCP is apparently loading at boot because there is a long delay before boot finishes.  Now what?  How do I get eCS router to talk to the Linksys Wireless-G router that is connected to the DSL line, which is connected to the Lindows PC being used to write this?  I feel that I am almost there but don't know how to open the door.  And yes I read so much that I am more confused than ever!!  Mark
  

       

Some routers by default have turned of the build in dhcp server. Have
you switched this on ?

Roderick




     

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


   

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=