In-reply-to: <417D11B4.2000903@verizon.net>
Message-id: <5593-SnapperMsg4EDDFFFDBDA37809@68.246.42.161>
MIME-version: 1.0
Content-type: text/plain; charset=us-ascii
Content-transfer-encoding: 7BIT
References: Message-ID:
Date:  Mon, 25 Oct 2004 23:41 -0400
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  Lewis G Rosenthal <os2-wireless_users@2rosenthals.com>
To:  os2-wireless_users@2rosenthals.com
Subject: [OS2Wireless] [Fwd: [Fwd: Re: eCS 1.2/DSL]]

Hi, Mark.  It surely looks like DHCP is enabled. Please do the following & 
report your results:

>From a command line, type PING 192.168.1.1 and tell us whether you get a 
reply (press Ctrl-C to stop the ping). Next, open Mozilla, and enter 
192.168.1.1 and see if you can log in (the Linksys default is no username & 
a password of "admin"). If this works (as I suspect it will), make note of 
the internet connection type as configured on the main page, & post the 
setting here. 

Also, please give us detailed info on your setup, including:

Type  of  DSL connection you have, and the model of your DSL bridge.

BTW, if you had made it to Warpstock this weekend, I covered much of this 
in my Wi-Fi classes & there was also a home networking session. Also, you 
could have told Roderick in person what you thought of his answer! :-D

Warpstock 2004 in Denver was GREAT!!!!!!!!!
___
Lewis
___
Lewis G Rosenthal
Rosenthal & Rosenthal
Sent via SnapperMail


...... Original Message .......
On Mon, 25 Oct 2004 10:46:12 -0400 "Marcus H. Russell, P.E., L.S." 
<markrussell1@verizon.net> wrote:
>
>
>-------- Original Message --------
>Subject: 	[Fwd: Re: eCS 1.2/DSL]
>Date: 	Mon, 25 Oct 2004 09:29:10 -0400
>From: 	Marcus H. Russell, P.E., L.S. <markrussell1@verizon.net>
>Reply-To: 	markrussell1@verizon.net
>Organization: 	Russell & Associates
>To: 	steward@mail.2rosenthals.com
>
>
>
>Please find my correspondence with Mensys that got me no help.  Has any 
>body figured out how to get a eCS system to talk, via wireless routers, 
>to router connected to a DSL line?  Mark
>
>-------- Original Message --------
>Subject: 	Re: eCS 1.2/DSL
>Date: 	Sun, 24 Oct 2004 18:21:04 -0400
>From: 	Marcus H. Russell, P.E., L.S. <markrussell1@verizon.net>
>Reply-To: 	markrussell1@verizon.net
>Organization: 	Russell & Associates
>To: 	Roderick Klein <rwklein@mensys.nl>
>References: 	<200410242050.i9OKolB04687@relay2.san1.attens.com>
>
>
>
>I don't know how to turn on DHCP, but I found C:\MPTN\BIN\dhcpmon.exe 
>which, when run, yielded  DDNS Host Name: Not Registered; IP Adress 
>192.168.1.100; DHCP client has valid lease.  (as usual I have no idea 
>what any of that means)  I also went to C:\TCPIP\bin and ran 
>tcpstart.cmd.  I don't know what this accomplished.  Starting Mozilla 
>browser fails.  I need detailed, step by step, instructions on how to 
>get these routers talking to each other.
>Thanks, Mark
>
>Roderick Klein wrote:
>
>>On Sun, 24 Oct 2004 11:38:25 -0400, Marcus H. Russell, P.E., L.S.
>>wrote:
>>
>>  
>>
>>>Here is what I did.  Installed a Belkin NIC, which eCS 1.2 recognized 
>>>when I installed 1.2.  BTW, 1.2 install was a breeze.  I bought a 
>>>Linksys Wireless-B Broadband Router and connected it to the Belkin NIC.  
>>>DHCP is apparently loading at boot because there is a long delay before 
>>>boot finishes.  Now what?  How do I get eCS router to talk to the 
>>>Linksys Wireless-G router that is connected to the DSL line, which is 
>>>connected to the Lindows PC being used to write this?  I feel that I am 
>>>almost there but don't know how to open the door.  And yes I read so 
>>>much that I am more confused than ever!!  Mark
>>>    
>>>
>>
>>Some routers by default have turned of the build in dhcp server. Have
>>you switched this on ?
>>
>>Roderick
>>
>>
>>  
>>
>
>
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
>To unsubscribe from this list, send a message to
>steward@2rosenthals.com with the command
>"unsubscribe os2-wireless_users" in the body
>(omit the quotes).
>
>For help with other commands, send a message
>to steward@2rosenthals.com with the command
>"help" in the body (omit the quotes).
>
>This list is hosted by Rosenthal & Rosenthal
>P.O. Box 281, Deer Park, NY 11729-0281. Non-
>electronic communications related to content
>contained in these messages should be directed
>to the above address. (CAN-SPAM Act of 2003)
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
>

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=