| Od: |
Lewis G Rosenthal <os2-wireless_users@2rosenthals.com> |
Glava
Izvorno E-sporo?ilo |
| Pošiljalec: |
os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com> |
| Zadeva: |
[OS2Wireless] [Fwd: [Fwd: Re: eCS 1.2/DSL]] |
| Datum: |
Mon, 25 Oct 2004 23:41 -0400 |
| Za: |
os2-wireless_users@2rosenthals.com |
|
|---|
Hi, Mark. It surely looks like DHCP is enabled. Please do the following &
report your results:
>From a command line, type PING 192.168.1.1 and tell us whether you get a
reply (press Ctrl-C to stop the ping). Next, open Mozilla, and enter
192.168.1.1 and see if you can log in (the Linksys default is no username &
a password of "admin"). If this works (as I suspect it will), make note of
the internet connection type as configured on the main page, & post the
setting here.
Also, please give us detailed info on your setup, including:
Type of DSL connection you have, and the model of your DSL bridge.
BTW, if you had made it to Warpstock this weekend, I covered much of this
in my Wi-Fi classes & there was also a home networking session. Also, you
could have told Roderick in person what you thought of his answer! :-D
Warpstock 2004 in Denver was GREAT!!!!!!!!!
___
Lewis
___
Lewis G Rosenthal
Rosenthal & Rosenthal
Sent via SnapperMail
...... Original Message .......
On Mon, 25 Oct 2004 10:46:12 -0400 "Marcus H. Russell, P.E., L.S."
<markrussell1@verizon.net> wrote:
>
>
>-------- Original Message --------
>Subject: [Fwd: Re: eCS 1.2/DSL]
>Date: Mon, 25 Oct 2004 09:29:10 -0400
>From: Marcus H. Russell, P.E., L.S. <markrussell1@verizon.net>
>Reply-To: markrussell1@verizon.net
>Organization: Russell & Associates
>To: steward@mail.2rosenthals.com
>
>
>
>Please find my correspondence with Mensys that got me no help. Has any
>body figured out how to get a eCS system to talk, via wireless routers,
>to router connected to a DSL line? Mark
>
>-------- Original Message --------
>Subject: Re: eCS 1.2/DSL
>Date: Sun, 24 Oct 2004 18:21:04 -0400
>From: Marcus H. Russell, P.E., L.S. <markrussell1@verizon.net>
>Reply-To: markrussell1@verizon.net
>Organization: Russell & Associates
>To: Roderick Klein <rwklein@mensys.nl>
>References: <200410242050.i9OKolB04687@relay2.san1.attens.com>
>
>
>
>I don't know how to turn on DHCP, but I found C:\MPTN\BIN\dhcpmon.exe
>which, when run, yielded DDNS Host Name: Not Registered; IP Adress
>192.168.1.100; DHCP client has valid lease. (as usual I have no idea
>what any of that means) I also went to C:\TCPIP\bin and ran
>tcpstart.cmd. I don't know what this accomplished. Starting Mozilla
>browser fails. I need detailed, step by step, instructions on how to
>get these routers talking to each other.
>Thanks, Mark
>
>Roderick Klein wrote:
>
>>On Sun, 24 Oct 2004 11:38:25 -0400, Marcus H. Russell, P.E., L.S.
>>wrote:
>>
>>
>>
>>>Here is what I did. Installed a Belkin NIC, which eCS 1.2 recognized
>>>when I installed 1.2. BTW, 1.2 install was a breeze. I bought a
>>>Linksys Wireless-B Broadband Router and connected it to the Belkin NIC.
>>>DHCP is apparently loading at boot because there is a long delay before
>>>boot finishes. Now what? How do I get eCS router to talk to the
>>>Linksys Wireless-G router that is connected to the DSL line, which is
>>>connected to the Lindows PC being used to write this? I feel that I am
>>>almost there but don't know how to open the door. And yes I read so
>>>much that I am more confused than ever!! Mark
>>>
>>>
>>
>>Some routers by default have turned of the build in dhcp server. Have
>>you switched this on ?
>>
>>Roderick
>>
>>
>>
>>
>
>
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
>To unsubscribe from this list, send a message to
>steward@2rosenthals.com with the command
>"unsubscribe os2-wireless_users" in the body
>(omit the quotes).
>
>For help with other commands, send a message
>to steward@2rosenthals.com with the command
>"help" in the body (omit the quotes).
>
>This list is hosted by Rosenthal & Rosenthal
>P.O. Box 281, Deer Park, NY 11729-0281. Non-
>electronic communications related to content
>contained in these messages should be directed
>to the above address. (CAN-SPAM Act of 2003)
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
>
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
|