Message-ID: <417D11B4.2000903@verizon.net>
Organization: Russell & Associates
User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.5) Gecko/20031211 Debian/1.5-2.0.0.lindows0.0.43.45+0
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Date:  Mon, 25 Oct 2004 10:46:12 -0400
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  "Marcus H. Russell, P.E., L.S." <os2-wireless_users@2rosenthals.com>
To:  os2-wireless_users@2rosenthals.com
Subject: [OS2Wireless] [Fwd: [Fwd: Re: eCS 1.2/DSL]]



-------- Original Message --------
Subject: 	[Fwd: Re: eCS 1.2/DSL]
Date: 	Mon, 25 Oct 2004 09:29:10 -0400
From: 	Marcus H. Russell, P.E., L.S. <os2-wireless_users@2rosenthals.com>
Reply-To: 	markrussell1@verizon.net
Organization: 	Russell & Associates
To: 	steward@mail.2rosenthals.com



Please find my correspondence with Mensys that got me no help.  Has any 
body figured out how to get a eCS system to talk, via wireless routers, 
to router connected to a DSL line?  Mark

-------- Original Message --------
Subject: 	Re: eCS 1.2/DSL
Date: 	Sun, 24 Oct 2004 18:21:04 -0400
From: 	Marcus H. Russell, P.E., L.S. <os2-wireless_users@2rosenthals.com>
Reply-To: 	markrussell1@verizon.net
Organization: 	Russell & Associates
To: 	Roderick Klein <rwklein@mensys.nl>
References: 	<200410242050.i9OKolB04687@relay2.san1.attens.com>



I don't know how to turn on DHCP, but I found C:\MPTN\BIN\dhcpmon.exe 
which, when run, yielded  DDNS Host Name: Not Registered; IP Adress 
192.168.1.100; DHCP client has valid lease.  (as usual I have no idea 
what any of that means)  I also went to C:\TCPIP\bin and ran 
tcpstart.cmd.  I don't know what this accomplished.  Starting Mozilla 
browser fails.  I need detailed, step by step, instructions on how to 
get these routers talking to each other.
Thanks, Mark

Roderick Klein wrote:

>On Sun, 24 Oct 2004 11:38:25 -0400, Marcus H. Russell, P.E., L.S.
>wrote:
>
>  
>
>>Here is what I did.  Installed a Belkin NIC, which eCS 1.2 recognized 
>>when I installed 1.2.  BTW, 1.2 install was a breeze.  I bought a 
>>Linksys Wireless-B Broadband Router and connected it to the Belkin NIC.  
>>DHCP is apparently loading at boot because there is a long delay before 
>>boot finishes.  Now what?  How do I get eCS router to talk to the 
>>Linksys Wireless-G router that is connected to the DSL line, which is 
>>connected to the Lindows PC being used to write this?  I feel that I am 
>>almost there but don't know how to open the door.  And yes I read so 
>>much that I am more confused than ever!!  Mark
>>    
>>
>
>Some routers by default have turned of the build in dhcp server. Have
>you switched this on ?
>
>Roderick
>
>
>  
>



=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=