MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Message-ID: <auto-000326454821@admin.nni.com>
Date:  Sat, 10 Jul 2004 14:15:10 -0400 (EDT)
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  "Stanley Sidlov" <os2-wireless_users@2rosenthals.com>
To:  "os2-wireless_users@2rosenthals.com" <os2-wireless_users@2rosenthals.com>
Subject: [OS2Wireless] WiFi Wiget XLan Monitor ??

I installed the widget as a app.  I am not invoking it now,  and this is the behavior I am seeing. 

If I bootup with the wireless card inserted,  and the network cable inserted,  the system choses to use  the wireless 
which appears to be using a hard coded IP. 

 If I remove the wireless card while running, the system switches to the wired connection. 

In neither case does reinsterting the card change the network to the wireless. 

My wireless MPTS configuration is setup for my home as the default. 

If I put in the card and start the Monitor, it finds the card, and the TCPIP icon appears in it, showing that it is 
configuring but it never configures unless I reapply the selected configuration, my home network. 






=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=