on Tue, 29 Jun 2004 16:02:49 -0400 (EDT), "Carl Gehr" <Carl.Gehr@attglobal.net>
wrote:
> I've been using Neil's script [slightly modified, but THANK YOU very
> much!] for a while. One thing to note: Even if you have DHCPMON
> running, it will only show that the lease that you had for your wired
> connection is no longer there. It does NOT pick up the WiFi lease
> status.
>
> My ignorant explanation is: The monitor is only looking at LAN0. And,
> the Settings->MonitorInterface only shows LAN0. I have never been able
> to figure out from any documentation how to get it to switch and look
> at LAN1.
If you've set up your system correctly, then you can change from LAN0 to LAN1
by using the dropdown box in DHCPMON. It remembers the last setting.
>
> My test to see if the WiFi is active is to simply look at the IPSpeed
> monitor to see if there is a second network and, if so, switch to what
> I believe to be the WiFi and see if there is traffic flowing. Doing a
> ReLoad with Mozilla is also a good clue: If it does something, then
> the WiFi must be active... ;-)
Is that because your drive doesn't support WLAN or WifiStat?
Neil
Neil Waldhauer neil@blondeguy.com www.blondeguy.com
Expert consulting for OS/2 and eComStation
We do precision guesswork.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
volver a la lista