Once you have both drivers loading, one will be LAN0 and one will be LAN1.
Without the wireless adapter in, you should be able to network with LAN0.
Then, when you do plug in the wireless card, nothing should change.
But when you run my script, then you should switch over to LAN1. That doesn't
mean anything useful will happen with LAN1, yet. Before you can use DHCP to get
your IP address, you'll need to get all the wireless parameters correct.
I'm not sure where on the above map you are going wrong.
Neil
Neil Waldhauer neil@blondeguy.com www.blondeguy.com
Expert consulting for OS/2 and eComStation
Where are we going, and what am I doing in this handbasket?
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
volver a la lista