Message-Id: <20040611221816-39239-8@molen>
In-Reply-To: <40C90AE7.C9552C69@rollanet.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Date:  Fri, 11 Jun 2004 22:18:16 +0200 (CDT)
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  "Peter Verweij" <os2-wireless_users@2rosenthals.com>
To:  "os2-wireless_users@2rosenthals.com" <os2-wireless_users@2rosenthals.com>
Subject: [OS2Wireless] 128 bit WEP

On Thu, 10 Jun 2004 20:29:11 -0500, Sam Lewis wrote:

>If I configure the NIC only in MPTS / Protocol.ini with the encryption key I can't get on the network at all.  But if I do the same thing with an AP that is
>an open system it connects to the network just fine.  Is that a bug?  Or is Wifistate supposed to be a requirement?

Hi,

I don't understand what you mean.(first sentence) 
Are you sure you enabled the wep key if you put it in mpts? under authentication type you have tx key number where you should give the number where 
you stored your wep key (normally 1)
Wifistate isn't required I used the Artem driver and a release candidate without wifistat and wep enabled. 

Greetings,

Peter


=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=