On Wed, 09 Jun 2004 13:48:55 -0500, Sam Lewis wrote:
>Do I have to put the key into the protocol.ini and wifistate?
>
>It took 10 to 15 minutes for the network to assign an IP address. Also the NIC
>doesn't start looking for the network until I run Wifistate. I thought it
>would connect to the network automatically once I put all of the info into the
>protocol.ini.
Hi,
It depends, if you have a dhcp address then putting the information (wepkey ssid) in mpts speeds up the boot process. Because after initialising the ssid
and wep your dhcp address is given.
The new wxwidget doesn't allow to put info about wep and ssid in the mpts. (i couldn't get is working after clearing mpts it works great)
Peter
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
back to list