Message-ID: <40AD63D2.4090508@nylonoxygen.com>
User-Agent: Mozilla/5.0 (OS/2; U; Warp 4.5; en-US; rv:1.6) Gecko/20040117
MIME-Version: 1.0
References: <200405202333.i4KNXG709146@ruby.fltg.net>
In-Reply-To: <200405202333.i4KNXG709146@ruby.fltg.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Date:  Fri, 21 May 2004 02:05:06 +0000
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  Adam McNutt <os2-wireless_users@2rosenthals.com>
To:  os2-wireless_users@2rosenthals.com
Subject: [OS2Wireless] Cisco 340 not working

I'm going to guess and say that the Cisco 342 isn't compatible with the 
Cisco 340 driver.  I have a ThinkPad T21, and my Cisco 340 works great 
after installing the driver.  I did go buy an IBM High Speed card, 
though, as I want to use the utility, should I ever find it, for 
changing configurations.  I also have a Dell TrueMobile (same as an 
Orinoco Gold) and a Linksys WPC11 versions 2.5 and 4.  I have gotten the 
best signal strength out of the orinoco cards (my Dell and IBM cards).

Hope that helps...

Adam McNutt

PS...where DO I get the IBM utility to change things around?

Julian Thomas wrote:

>I took the plunge to set up a wireless capability (most of the house is on
>a wired network but I wanted to be able to use a thinkpad T23 untethered). 
>I have a Dlink DWL700AP access point and the Cisco 342 pc card.  Needless
>to say, it's all working smoothly under Win2k.
>
>eCS is a different story.  It wouldn't work, so I installed the latest
>cardbus drivers from the eCS website.  They work - at least I can use a pc
>card modem and a cf adapter and read the cf card.  However, the wifi is
>still not working under eCS (yet).
>
>Situation is that I have a wired NIC in the machine - assigned to Lan0
>[since it was the first one there] using dhcp.  I installed the cisco
>drivers from the file that I found on hobbes, and verified that the ssid
>matches that in the WAP (I'm not using any WEP for now; not concerned due
>to an extremely rural location - it's too far even for drive-by access). 
>I get an amber activity light on the cisco, but no green status indicator.
>
>LANTRAN.LOG shows:
>
>FFST/2 is installed but is not started.  LANMSGDD is loaded and
>operational.
>
>Netstat shows the adapter, as does PC Card director [what a kludgy
>interface!]
>
>TCPIP config won't allow me to set it to DHCP (that may be because I had
>LAN0 set to use DHCP).
>
>What should I try next?
>
> 
>  
>

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=