os2-wireless_users@2rosenthals.com ?????????????? ????? #4956

???:	"David Butkovich" <os2-wireless_users@2rosenthals.com>	?? ???? ?????????
???:	os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
??:	[OS2Wireless] Cisco 340 not working
??:	Thu, 20 May 2004 20:10:37 -0500
??:	"os2-wireless_users@2rosenthals.com" <os2-wireless_users@2rosenthals.com>

On Thu, 20 May 2004 19:20:25 -0400, Julian Thomas wrote: >I took the plunge to set up a wireless capability (most of the house is on >a wired network but I wanted to be able to use a thinkpad T23 untethered). >I have a Dlink DWL700AP access point and the Cisco 342 pc card. Needless >to say, it's all working smoothly under Win2k. > >eCS is a different story. It wouldn't work, so I installed the latest >cardbus drivers from the eCS website. They work - at least I can use a pc >card modem and a cf adapter and read the cf card. However, the wifi is >still not working under eCS (yet). > >Situation is that I have a wired NIC in the machine - assigned to Lan0 >[since it was the first one there] using dhcp. I installed the cisco >drivers from the file that I found on hobbes, and verified that the ssid >matches that in the WAP (I'm not using any WEP for now; not concerned due >to an extremely rural location - it's too far even for drive-by access). >I get an amber activity light on the cisco, but no green status indicator. > >LANTRAN.LOG shows: > >FFST/2 is installed but is not started. LANMSGDD is loaded and >operational. > >Netstat shows the adapter, as does PC Card director [what a kludgy >interface!] > >TCPIP config won't allow me to set it to DHCP (that may be because I had >LAN0 set to use DHCP). > >What should I try next? > > >-- > Julian Thomas: jt@jt-mj.net http://jt-mj.net The following frags from my vintage Toshiba Laptop using Warp 3 FP 40 on a Linksys WAP54G for TCPIP and NetBios using static addressing. Config.sys for PCMCIA REM FOR PCMCIA CARDS BASEDEV=PCMCIA.SYS BASEDEV=IBM2TOS1.SYS /S0=2 /E REM USE FOR HARD DRIVES BASEDEV=PCM2ATA.ADD /S:1 /B REM FOR FAX/MODEM DEVICE=C:\OS2\BOOT\AUTODRV2.SYS C:\OS2\AUTODRV2.INI REM FOR WINOS/2 DEVICE=C:\OS2\MDOS\VPCMCIA.SYS My Lantran.log for netbios for TCPIP and NetBios LT00073: FFST/2 is installed but is not started. LANTRAN.LOG is being created. IBM OS/2 LANMSGDD [04/26/95] 2.01 is loaded and operational. IBM OS/2 LAN Protocol Manager IBM OS/2 NETBEUI 2.60.5 NETBEUI: Using a 32-bit data segment. Installing NETWKSTA.200 Version 4.0. IBM LAN Redirector (Apr 17, 1995) IBM OS/2 NETBIOS 4.0 Adapter 0 has 155 NCBs, 96 sessions, and 7 names available to NETBIOS applications. NETBIOS 4.0 is loaded and operational. IBM LANVDD is loaded and operational. IBM OS/2 LAN Netbind Adapter 0 is using node address 0004AC25A51E. The Token-Ring format is 002035A4A578. Protocol.ini end frag [PCMNICCS_nif] DriverName = PCM_CS$ IOBASE = 0x300 INTERRUPT = 11 RAMADDRESS = 0x0 PCMCIA Setup.cmd rem laptop01 - Toshiba Laptop rem 192.168.1.10 Cisco AiroNet 340 wireless and rem All devices on the same subnet. route -fh arp -f ifconfig lo 127.0.0.1 ifconfig lan0 192.168.1.10 netmask 255.255.255.0 metric 1 mtu 1492 route add default 192.168.1.1 1 ipgate off That is all I can think of at the moment, use these for clues on your setup and let us know how it's going. David David David Butkovich CM Consultants, Inc. Ocoee, Florida USA =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= To unsubscribe from this list, send a message to steward@2rosenthals.com with the command "unsubscribe os2-wireless_users" in the body (omit the quotes). For help with other commands, send a message to steward@2rosenthals.com with the command "help" in the body (omit the quotes). This list is hosted by Rosenthal & Rosenthal P.O. Box 281, Deer Park, NY 11729-0281. Non- electronic communications related to content contained in these messages should be directed to the above address. (CAN-SPAM Act of 2003) =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

???????: ????, ??????, ??????.
?????????
??? ????????